Clear filters Apply
Results for:
Number of results 433
UNE-EN 60512-1-100:2012 UNE
Status: Vigente/ 2012-09-19
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
UNE-EN 61587-1:2007 UNE
Status: Anulada/ 2014-12-14
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -- Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis (IEC 61587-1:2007).
UNE-EN 60512-13-1:2006 CORR:2007 UNE
Status: Vigente/ 2007-05-09
Connectors for electronic equipment - Tests and measurements -- Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
UNE-EN 60512-13-5:2006 CORR:2007 UNE
Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
UNE-EN 60512-13-2:2006 CORR:2007 UNE
Connectors for electronic equipment - Tests and measurements -- Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces
UNE-EN 60512-9-3:2006 CORR:2007 UNE
Status: Anulada/ 2014-07-27
Connectors for electronic equipment - Tests and measurements -- Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load
UNE-EN 60512-12-2:2006 CORR:2007 UNE
Status: Vigente/ 2007-04-25
Connectors for electronic equipment - Tests and measurements -- Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method
UNE-EN 60512-12-3:2006 CORR:2007 UNE
Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
UNE-EN 60512-12-4:2006 CORR:2007 UNE
Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
UNE-EN 60512-12-5:2006 CORR:2007 UNE
Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
UNE-EN 60512-12-1:2007 UNE
Status: Vigente/ 2007-02-07
Connectors for electronic equipment - Tests and measurements -- Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method (IEC 60512-12-1:2006).
UNE-EN 60512-14-2:2007 UNE
Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006).
UNE-EN 60512-14-4:2007 UNE
Connectors for electronic equipment - Tests and measurements -- Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006).
UNE-EN 60512-14-5:2007 UNE
Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006).
UNE-EN 60512-14-6:2007 UNE
Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006).
UNE-EN 60512-1-100:2007 UNE
Status: Anulada/ 2015-03-29
Connectors for electronic equipment - Tests and measurements -- Part 1-100: General - Applicable publications (IEC 60512-1-100:2006)
UNE-EN 60512-12-3:2006 UNE
Status: Vigente/ 2006-12-13
Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006).
UNE-EN 60512-12-4:2006 UNE
Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method (IEC 60512-12-4:2006).
UNE-EN 60512-12-5:2006 UNE
Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006).
UNE-EN 60512-13-1:2006 UNE
Status: Vigente/ 2006-09-13
Connectors for electronic equipment - Tests and measurements -- Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces (IEC 60512-13-1:2006)
UNE-EN 60512-13-2:2006 UNE
Connectors for electronic equipment - Tests and measurements -- Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces (IEC 60512-13-2:2006)
UNE-EN 60512-13-5:2006 UNE
Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006).
UNE-EN 60512-9-3:2006 UNE
Connectors for electronic equipment - Tests and measurements -- Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load. (IEC 60512-9-3:2006)
UNE-EN 60512-12-2:2006 UNE
Status: Vigente/ 2006-06-21
Connectors for electronic equipment - Tests and measurements -- Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method. (IEC 60512-12-2:2006)
UNE-EN 60512-23-3:2001 CORR:2005 UNE
Status: Anulada/ 2022-01-19
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories.
UNE-EN 60512-23-7:2005 UNE
Status: Vigente/ 2005-09-21
Connectors for electronic equipment - Tests and measurements -- Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
UNE-EN 60512-25-7:2005 UNE
Status: Vigente/ 2005-09-14
Connectors for electronic equipment - Tests and measurements -- Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
UNE-EN 60512-25-5:2005 UNE
Status: Vigente/ 2005-05-18
Connectors for electronic equipment - Tests and measurements -- Part 25-5: Test 25e - Return loss
UNE-EN 60512-25-6:2005 UNE
Connectors for electronic equipment - Tests and measurements -- Part 25-6: Test 25f: Eye pattern and jitter
UNE-IEC 60512-9:2005 UNE
Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests
UNE-IEC 60512-5:2005 UNE
Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests
UNE-IEC 60512-7:2005 UNE
Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
UNE-EN 60352-5/A1:2004 UNE
Status: Anulada/ 2011-02-01
Solderless connections -- Part 5: Press-in connections - General requirements, test methods and practical guidance
UNE-EN 60512-11-14:2004 UNE
Status: Vigente/ 2004-05-21
Connectors for electronic equipment - Tests and measurements -- Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
UNE-EN 60512-10-4:2004 UNE
Status: Vigente/ 2004-04-30
Connectors for electronic equipment - Tests and measurements -- Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)
UNE-EN 60512-11-7:2004 UNE
Connectors for electronic equipment - Tests and measurements -- Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
UNE-EN 60512-2-2:2004 UNE
Connectors for electronic equipment - Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
UNE-EN 60512-2-5:2004 UNE
Connectors for electronic equipment - Tests and measurements -- Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
UNE-EN 60512-4-1:2004 UNE
Connectors for electronic equipment - Tests and measurements -- Part 4-1: Voltage stress tests - Test 4a: Voltage proof
UNE-EN 60068-2-42:2004 UNE
Status: Vigente/ 2004-04-23
Environmental testing -- Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
UNE-EN 60068-2-43:2004 UNE
Environmental testing -- Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections
UNE-EN 60352-7:2004 UNE
Status: Anulada/ 2024-01-21
Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance
UNE-EN 61587-2:2003 UNE
Status: Anulada/ 2014-09-29
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -- Part 2: Seismic tests for cabinets and racks
UNE-EN 60512-1-4:2003 UNE
Status: Vigente/ 2003-07-18
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 1: General -- Section 4: Test 1d: Contact protection effectiveness (scoop-proof).
UNE-EN 61076-2-102:2003 UNE
Status: Vigente/ 2003-06-20
Connectors for electronic equipment -- Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply
UNE-EN 61076-4-111:2003 UNE
Status: Anulada/ 2023-09-21
Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
UNE-EN 60352-2/A2:2003 UNE
Status: Anulada/ 2009-03-01
Solderless connections -- Part 2: Solderless crimped connections - General requirements, test methods and practical guidance
UNE-EN 60512-25-2:2003 UNE
Status: Vigente/ 2003-05-30
Connectors for electronic equipment - Tests and measurements -- Part 25-2: Test 25b: Attenuation (insertion loss).
UNE-EN 60512-1-100:2003 UNE
Status: Anulada/ 2009-04-01
Connectors for electronic equipment - Tests and measurements -- Part 1-100: General - Applicable publications.
UNE-EN 60512-11-12:2003 UNE
Status: Vigente/ 2003-04-25
Connectors for electronic equipment - Tests and measurements -- Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic.
