Clear filters Apply
Results for:
Number of results 329
UNE-EN ISO 29862:2025 UNE
Status: Vigente/ 2025-10-01
Self adhesive tapes - Determination of peel adhesion properties (ISO 29862:2024)
UNE-EN ISO 21265:2025 UNE
Status: Vigente/ 2025-01-15
Building and civil engineering sealants - Assessment of the fungal growth on sealant surfaces (ISO 21265:2021)
UNE-EN ISO 10364:2024 UNE
Status: Vigente/ 2024-10-16
Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2024)
UNE-EN ISO 21368:2024 UNE
Status: Vigente/ 2024-10-02
Adhesives - Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures (ISO 21368:2022)
UNE-EN ISO 10563:2024 UNE
Status: Vigente/ 2024-03-27
Building and civil engineering sealants - Determination of change in mass and volume (ISO 10563:2023)
UNE-EN ISO 6076:2024 UNE
Status: Vigente/ 2024-03-13
Adhesives - Installation of floor coverings, wood flooring, levelling compounds and tiles - Specification of trowel notch sizes (ISO 6076:2023, Corrected version 2023-09)
UNE-EN 301:2023 UNE
Status: Vigente/ 2023-12-20
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
UNE-EN 302-1:2023 UNE
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
UNE-EN 302-2:2023 UNE
Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
UNE-EN 302-3:2023 UNE
Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
UNE-EN 302-4:2023 UNE
Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
UNE-EN 302-5:2023 UNE
Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
UNE-EN 302-6:2023 UNE
Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
UNE-EN 302-7:2023 UNE
Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
UNE-EN 302-8:2023 UNE
Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear
UNE-EN 15434-1:2023 UNE
Bonding sealants - Part 1: Bonded glazing sealants for direct light exposure
UNE-EN 17668:2023 UNE
Status: Vigente/ 2023-10-31
Adhesives for floor coverings - Preparation of adhesive application - Test methods for the determination of corresponding humidity of mineral substrates
UNE-EN 16254:2023 UNE
Status: Vigente/ 2023-09-27
Adhesives - Emulsion polymer isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements
UNE-EN 15425:2023 UNE
Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
UNE-EN ISO 11339:2022 UNE
Status: Vigente/ 2022-10-26
Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2022)
UNE-EN ISO 10365:2022 UNE
Adhesives - Designation of main failure patterns (ISO 10365:2022)
UNE-CEN/TR 15990:2022 IN UNE
Status: Vigente/ 2022-04-27
Data Sheets - Footwear Tests Materials and Test Adhesives
UNE-EN 17619:2022 UNE
Status: Vigente/ 2022-04-06
Classification of wood adhesives for non-structural timber products for exterior use
UNE-EN 17618:2022 UNE
Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading
UNE-EN ISO 6927:2021 UNE
Status: Vigente/ 2021-12-22
Buildings and civil engineering sealants - Vocabulary (ISO 6927:2021)
UNE-EN ISO 9046:2021 UNE
Building and civil engineering sealants - Determination of adhesion/cohesion properties at constant temperature (ISO 9046:2021)
UNE-EN 17334:2021 UNE
Status: Vigente/ 2021-10-06
Glued-in rods in glued structural timber products - Testing, requirements and bond shear strength classification
UNE-EN 17418:2021 UNE
Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification
UNE-EN ISO 22636:2021 UNE
Status: Vigente/ 2021-04-07
Adhesives - Adhesives for floor coverings - Requirements for mechanical and electrical performance (ISO 22636:2020)
UNE-EN 17408:2021 UNE
Status: Vigente/ 2021-03-31
Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
UNE-EN ISO 17178:2020 UNE
Status: Vigente/ 2020-10-21
Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements (ISO 17178:2013)
UNE-EN 17333-1:2020 UNE
Status: Vigente/ 2020-07-29
Characterisation of one component foam - Part 1: Foam yield characteristics
UNE-EN 17333-3:2020 UNE
Characterisation of one component foam - Part 3: Application
UNE-EN 17333-2:2020 UNE
Characterisation of one component foam - Part 2: Expansion characteristics
UNE-EN 17333-4:2020 UNE
Characterisation of one component foam - Part 4: Mechanical strength
UNE-EN 17333-5:2020 UNE
Characterisation of one component foam - Part 5: Insulation
UNE-EN ISO 22637:2020 UNE
Status: Vigente/ 2020-06-10
Adhesives - Test of adhesive for floor covering - Determination of the electrical resistance of adhesive films and composites (ISO 22637:2019)
UNE-EN 14257:2020 UNE
Status: Vigente/ 2025-03-12
Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
UNE-EN ISO 22631:2020 UNE
Adhesives - Test method for adhesives for floor and wall coverings - Peel test (ISO 22631:2019)
UNE-EN ISO 22632:2020 UNE
Adhesives - Test method for adhesives for floor and wall coverings - Shear test (ISO 22632:2019)
UNE-EN ISO 22635:2020 UNE
Adhesives - Test methods for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing (ISO 22635:2019)
UNE-EN ISO 22633:2020 UNE
Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive (ISO 22633:2019)
UNE-EN ISO 10123:2020 UNE
Status: Vigente/ 2020-02-26
Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013)
UNE-EN ISO 29864:2020 UNE
Status: Vigente/ 2020-01-29
Self adhesive tapes - Measurement of breaking strength and elongation at break (ISO 29864:2018)
UNE-EN ISO 11343:2020 UNE
Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method (ISO 11343:2019)
UNE-EN 17224:2020 UNE
Determination of compressive shear strength of wood adhesives at elevated temperatures
UNE-EN ISO 29863:2020 UNE
Self adhesive tapes - Measurement of static shear adhesion (ISO 29863:2018)
UNE-EN ISO 29862:2020 UNE
Status: Anulada/ 2025-10-01
Self adhesive tapes - Determination of peel adhesion properties (ISO 29862:2018)
UNE-EN 15416-3:2017+A1:2019 UNE
Status: Vigente/ 2019-11-27
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
UNE-EN ISO 10364:2018 UNE
Status: Anulada/ 2024-10-16
Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2015)
