Clear filters Apply
Results for:
Number of results 51
UNE-EN 14469-2:2004 UNE
Status: Vigente/ 2025-03-27
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens
UNE-EN 14469-3:2004 UNE
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments
UNE-EN 14469-4:2004 UNE
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials
UNE-EN 14469-1:2004 UNE
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures
UNE-EN 12877-1:2000 UNE
Status: Vigente/ 2024-08-21
Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction
UNE-EN 12877-2:2000 UNE
COLOURING MATERIALS IN PLASTICS - DETERMINATION OF COLOUR STABILITY TO HEAT DURING PROCESSING OF COLOURING MATERIALS IN PLASTICS - PART 2: DETERMINATION BY INJECTION MOULDING
UNE-EN 12877-3:2000 UNE
Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test
UNE-EN 12877-4:2000 UNE
Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 4: Determination by two-roll milling
UNE 53934:2016 UNE
Status: Vigente/ 2023-06-19
Plastics. Elemental analysis in polymeric materials by X-ray fluorescence method
UNE-EN ISO 1043-4:2022 UNE
Status: Vigente/ 2022-06-29
Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:2021)
UNE 53375:2021 UNE
Status: Vigente/ 2021-01-20
Plastics. Determination of carbon black content in polyolefins and it products
UNE-EN ISO 23900-4:2019 UNE
Status: Vigente/ 2019-06-12
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling (ISO 23900-4:2015)
UNE-EN ISO 23900-5:2019 UNE
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test (ISO 23900-5:2015)
UNE-EN ISO 23900-6:2019 UNE
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 6: Determination by film test (ISO 23900-6:2015)
UNE-EN ISO 23900-1:2018 UNE
Status: Vigente/ 2018-03-14
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction (ISO 23900-1:2015)
UNE-EN ISO 23900-2:2018 UNE
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling (ISO 23900-2:2015)
UNE-EN ISO 23900-3:2018 UNE
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling (ISO 23900-3:2015)
UNE-EN ISO 1043-3:2017 UNE
Status: Vigente/ 2017-02-01
Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016)
UNE-EN ISO 1043-2:2012 UNE
Status: Vigente/ 2012-06-13
Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
UNE-CEN/TS 14577:2005 EX UNE
Status: Vigente/ 2005-07-13
Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1 000 Daltons
ISO 1043-4:2021 ISO
Status: Published/ 2021-07-27
Plastics — Symbols and abbreviated terms — Part 4: Flame retardants
ISO 1043-3:2016 ISO
Status: Published/ 2016-10-07
Plastics — Symbols and abbreviated terms — Part 3: Plasticizers
ISO 1043-2:2011 ISO
Status: Published/ 2011-11-10
Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials
ISO 15038:1999 ISO
Status: Published/ 1999-06-24
Plastics — Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials — Determination of active-oxygen content
PNE-EN ISO 1043-4:2021/prA1 PROY
Status: Procedure
Plastics - Symbols and abbreviated terms - Part 4: Flame retardants - Amendment 1 (ISO 1043-4:2021/DAM 1:2025)
UNE-EN ISO 1043-4:2000 UNE
Status: Anulada/ 2022-06-29
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 4: FLAME RETARDANTS (ISO 1043-4:1998)
UNE-EN ISO 1043-4:2000/A1:2016 UNE
Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998/Amd 1:2016)
UNE 53375-1:2007 UNE
Status: Anulada/ 2021-01-20
Plastics. Determination of carbon black content of polyolefins and its products. Part 1: Nitrogen atmosphere test
UNE 53375-2:2008 UNE
Plastics. Determination of carbon black content of polyolefins and its products. Part 2: Oven muffle method
UNE 53375-3:2011 UNE
Plastics. Determination of carbon black content of polyolefins and its products. Part 3: Thermogravimetric method
UNE-EN 1979:1999 UNE
Status: Anulada/ 2020-11-01
Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
UNE-EN 12061:1999 UNE
Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
UNE-EN 13900-4:2004 UNE
Status: Anulada/ 2019-06-12
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling
UNE-EN 13900-5:2006 UNE
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test
UNE-EN 13900-6:2013 UNE
Pigments and extenders - Methods of dispersion and assessment of dispersability in plastics - Part 6: Determination by film test
UNE-EN 13900-2:2003 UNE
Status: Anulada/ 2018-03-14
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling.
UNE-EN 13900-1:2003 UNE
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General Introduction.
UNE-EN 13900-3:2003 UNE
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling.
UNE-EN ISO 1043-3:2000 UNE
Status: Anulada/ 2017-02-01
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 3: PLASTICIZERS. (ISO 1043-3:1996)
UNE-EN ISO 1043-2:2002 UNE
Status: Anulada/ 2012-06-13
Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials. (ISO 1043-2:2000)
UNE 53392:1990 UNE
Status: Anulada/ 2007-12-13
PLASTICS. ANALYSIS METHODS FOR CHECKING HEAVY METALS IN COLOURING MATTERS TO BE USED IN POLYMERIC MATERIALS IN CONTACT WITH FOOD.
UNE 53366:1985 EX UNE
Status: Anulada/ 2007-05-03
PLASTICS. DETERMINATION OF FREE AROMATIC PRIMARY AMINES IN COLORANTS USED IN POLIMERIC MATERIALS IN CONTACT WITH FOODS
UNE 53375:1983 UNE
Status: Anulada/ 2007-02-28
PLASTICS. DETERMINATION OF CARBON BLACK CONTENT OF POLYOLEFINS AND ITS PRODUCTS
UNE 53277-2:1991 UNE
Status: Anulada/ 2002-04-23
PLASTICS. SYMBOLS. PART 2: FILLERS AND REINFORCING MATERIALS.
UNE 53277-3:1991 UNE
Status: Anulada/ 2000-12-14
PLASTICS. SYMBOLS. PART 3: PLASTICIZERS.
ISO 1043-4:1998/Amd 1:2016 ISO
Status: Withdrawn/ 2016-04-15
Plastics — Symbols and abbreviated terms — Part 4: Flame retardants — Amendment 1: Code numbers
ISO 1043-2:2000 ISO
Status: Withdrawn/ 2000-07-20
ISO 1043-4:1998 ISO
Status: Withdrawn/ 1998-02-12
ISO 1043-3:1996 ISO
Status: Withdrawn/ 1996-04-25
ISO 1043-2:1988 ISO
Status: Withdrawn/ 1988-10-13
Plastics — Symbols — Part 2: Fillers and reinforcing materials
