Clear filters Apply
Results for:
Number of results 90
UNE 16137:1986 UNE
Status: Vigente/ 1986-03-15
CORE DRILLS WITH PARALLEL SHANKS.
UNE 16129:1985 UNE
Status: Vigente/ 1985-12-15
LONG MORSE TAPER SHAUK TWIST DRILLS.
UNE 16127:1985 UNE
Status: Vigente/ 1985-11-15
CENTRE DRILLS FOR CENTRE HOLES WITH PROTECTING CHANFER. TYPE B.
UNE 16130:1985 UNE
CORE DRILLS WITH MORSE TAPER SHANKS.
UNE 16138:1985 UNE
Status: Vigente/ 1985-10-15
UNE 16122:1985 UNE
Status: Vigente/ 1985-06-15
PARALLEL SHANK TWIST DRILLS. EXTRA SHORT SERIES.
UNE 16139:1985 UNE
PARALLEL SHANK TWIST DRILLS, JOBBER AND STUB SERIES. MORSE TAPER SHANK TWIST DRILLS AND CORE DRILLS.
UNE 16123:1985 UNE
PARALLEL SHANK TWIST DRILLS. SHORT SERIES.
UNE 16125:1985 UNE
NORMAL TAPER SHANK TWIST DRILLS.
UNE 16134:1985 UNE
Status: Vigente/ 1985-01-15
LONG MORSE TAPER SHANK. CORE DRILLS.
UNE 16126:1971 UNE
Status: Vigente/ 1971-02-15
CENTRE DRILLS AT 60 DEGREES FOR MACHINING CENTRES FORM A.
UNE 16005:1971 UNE
HAND REAMERS.
UNE 16124:1967 UNE
Status: Vigente/ 1967-03-15
TWIST DRILLS. PARALLEL SHANK. LONG SERIES.
UNE 16121:1967 UNE
Status: Vigente/ 1967-02-15
TWIST DRILLS. DEFINITIONS AND CLASSIFICATION.
ISO 2238:2018 ISO
Status: Published/ 2018-09-21
Machine bridge reamers
ISO 5468:2017 ISO
Status: Published/ 2017-02-24
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions
ISO 494:2017 ISO
Cylindrical shank twist drills — Long series
ISO 2250:2017 ISO
Status: Published/ 2017-02-09
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
ISO 235:2016 ISO
Status: Published/ 2016-10-27
Parallel shank jobber and stub series drills and Morse taper shank drills
ISO 2540:2016 ISO
Status: Published/ 2016-10-24
Centre drills for centre holes with protecting chamfer — Type B
ISO 2541:2016 ISO
Centre drills for centre holes with radius form — Type R
ISO 4205:2016 ISO
Countersinks, 90°, with parallel shanks and solid pilots
ISO 3291:2016 ISO
Extra-long Morse taper shank twist drills
ISO 4206:2016 ISO
Status: Published/ 2016-10-14
Counterbores with parallel shanks and solid pilots
ISO 7079:2016 ISO
Core drills with parallel shanks and with Morse taper shanks
ISO 3292:2016 ISO
Extra-long parallel shank twist drills
ISO 4204:2016 ISO
Status: Published/ 2016-10-13
Countersinks, 90°, with Morse taper shanks and detachable pilots
ISO 10898:2016 ISO
Status: Published/ 2016-09-14
Spot drills
ISO 866:2016 ISO
Status: Published/ 2016-08-10
Centre drills for centre holes without protecting chamfers — Type A
ISO 3293:2016 ISO
Status: Published/ 2016-07-25
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
ISO 3294:2016 ISO
Status: Published/ 2016-07-21
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
ISO 3466:2016 ISO
Status: Published/ 2016-03-07
Machine taper pin reamers with parallel shanks
ISO 3467:2016 ISO
Status: Published/ 2016-03-04
Machine taper pin reamers with Morse taper shanks
ISO 236-2:2013 ISO
Status: Published/ 2013-05-08
Reamers — Part 2: Long fluted machine reamers with Morse taper shanks
ISO 3438:2013 ISO
Status: Published/ 2013-05-02
Subland twist drills for holes prior to tapping screw threads
ISO 9766:2012 ISO
Status: Published/ 2012-06-13
Drills with indexable inserts — Cylindrical shanks with a parallel flat
ISO 521:2011 ISO
Status: Published/ 2011-09-26
Machine chucking reamers with cylindrical shanks and Morse taper shanks
ISO 10888:1999 ISO
Status: Published/ 1999-11-04
Keyless type three-jaw drill chucks — Specification
ISO 10887:1999 ISO
Key type three-jaw drill chucks — Specification
ISO 239:1999 ISO
Status: Published/ 1999-09-30
Drill chuck tapers
ISO 10899:1996 ISO
Status: Published/ 1996-12-26
High-speed steel two-flute twist drills — Technical specifications
ISO 5419:1982/Cor 1:1996 ISO
Status: Published/ 1996-07-04
Twist drills — Terms, definitions and types — Technical Corrigendum 1
ISO 5420:1983 ISO
Status: Published/ 1983-12-01
Reamers — Terms, definitions and types
ISO 5419:1982 ISO
Status: Published/ 1982-12-01
Twist drills — Terms, definitions and types
ISO 236-1:1976 ISO
Status: Published/ 1976-11-01
Hand reamers
ISO 3465:1975 ISO
Status: Published/ 1975-08-01
Hand taper pin reamers
ISO 3314:1975 ISO
Status: Published/ 1975-05-01
Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive
ISO 522:1975 ISO
Status: Published/ 1975-02-01
Special tolerances for reamers
ISO 2402:1972 ISO
Status: Published/ 1972-12-01
Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers
ISO 2306:1972 ISO
Status: Published/ 1972-07-01
Drills for use prior to tapping screw threads
