Clear filters Apply
Results for:
Number of results 195
UNE-EN ISO 4957:2019 UNE
Status: Vigente/ 2019-04-24
Tool steels (ISO 4957:2018)
UNE 88412:2006 UNE
Status: Vigente/ 2016-12-21
Fibre-cement products NT (without asbestos). Guidelines for on-site cutting and machining works.
UNE 16149-1/1C:1986 UNE
Status: Vigente/ 1986-05-15
BASIC QUANTITIES IN CUTTING AND GRINDING - PART 1: GEOMETRY OF THE ACTIVE PART OF CUTTING TOOLS - GENERAL TERMS, REFERENCE SYSTEMS, TOOL AND WORKING ANGLES, CHIP BREAKERS.
UNE 16152:1985 UNE
Status: Vigente/ 1985-01-15
SIMPLE POINT CUTTING TOOLS. CORRER RADU.
UNE 16118:1984 UNE
Status: Current/1984-12-15
INDEXABLE INSERTS WITH FACET. TYPES: TPAN-TPCN-TPKN.
UNE 16161:1984 UNE
Status: Anulada/ 2017-09-28
INDEXABLE INSERTS WITH CYLINDRICAL HOLE. TYPES: TN-SN-CN-DN-RN.
UNE 16117:1984 UNE
Status: Vigente/ 1984-09-15
INDEXABLE INSERTS WITH FACET. TYPES' SNAN-SNCN-SNKN-SPAN-SPCN-SPKN.
UNE 16115:1983 UNE
Status: Vigente/ 1983-05-15
INDEXABLE INSERTS. TYPE TNUM-TNGN-TPUN-TPGN.
UNE 16116:1983 UNE
INDEXABLE INSERTS. TYPE SNUM-SNGN-SPUN-SPGN.
UNE 16120:1983 UNE
CARBIDE TIPS FOR SPECIAL TOOLS, TYPES G, H AND J.
UNE 16164:1982 UNE
Status: Vigente/ 1982-11-15
CARBIDE TIPS FOR THREADING.
UNE 16149-1:1982 UNE
Status: Vigente/ 1982-10-15
GEOMETRY OF THE ACTIVE PART CUTTING TOOLS. PART 1. GENERAL TERMS, REFERENCE SYSTEMS, TOOL AND WORKING ANGLES.
UNE 16100:1982 UNE
Status: Vigente/ 1982-09-15
CARBIDE TIPS. GROUPS OF APPLICATION.
UNE 16002:1975 UNE
Status: Vigente/ 1975-04-15
CUTTING TOOLS. CLASSIFICATION.
UNE 16131:1975 UNE
Status: Vigente/ 1975-02-15
DIAMETERS OF SHANK AND DRIVING SQUARES FOR TURNING TOOLS.
UNE 16113:1975 UNE
CODE OF CARBIDE AND CERAMIC TIPS DESIGNATION FOR MECHANICAL FIXING TIPS.
UNE-EN 62541-9:2012 UNE
Status: Anulada/ 2018-04-30
OPC unified architecture - Part 9: Alarms and conditions (Endorsed by AENOR in November of 2012.)
UNE-EN 62541-7:2012 UNE
OPC unified architecture - Part 7: Profiles (Endorsed by AENOR in November of 2012.)
UNE-EN 62541-10:2012 UNE
Status: Anulada/ 2018-04-15
OPC unified architecture - Part 10: Programs (Endorsed by AENOR in November of 2012.)
UNE-EN 62541-100:2015 UNE
Status: Vigente/ 2015-06-01
OPC unified architecture - Part 100: Device Interface (Endorsed by AENOR in June of 2015.)
UNE-EN 62541-10:2015 UNE
Status: Anulada/ 2023-08-12
OPC unified architecture - Part 10: Programs
UNE-EN 62541-13:2015 UNE
Status: Anulada/ 2023-07-17
OPC unified architecture - Part 13: Aggregates (Endorsed by AENOR in June of 2015.)
UNE-EN 62541-7:2015 UNE
Status: Anulada/ 2023-07-28
OPC unified architecture - Part 7: Profiles (Endorsed by AENOR in June of 2015.)
UNE-EN 62541-9:2015 UNE
Status: Anulada/ 2023-07-24
OPC unified architecture - Part 9: Alarms and conditions (Endorsed by AENOR in June of 2015.)
UNE-EN IEC 62541-13:2020 UNE
Status: Vigente/ 2020-09-01
OPC Unified Architecture - Part 13: Aggregates (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-EN IEC 62541-14:2020 UNE
Status: Vigente/ 2020-10-01
OPC Unified Architecture - Part 14: PubSub (Endorsed by Asociación Española de Normalización in October of 2020.)
UNE-EN IEC 62541-9:2020 UNE
OPC Unified Architecture - Part 9: Alarms and conditions (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-EN IEC 62541-7:2020 UNE
OPC unified architecture - Part 7: Profiles (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-EN IEC 62541-10:2020 UNE
OPC Unified Architecture - Part 10: Programs (Endorsed by Asociación Española de Normalización in October of 2020.)
PNE-prEN IEC 62541-7:2025 PROY
Status: Procedure
OPC unified architecture - Part 7: Profiles
PNE-prEN IEC 62541-9:2024 PROY
OPC Unified Architecture - Part 9: Alarms and Conditions
PNE-prEN IEC 62541-10:2024 PROY
OPC Unified Architecture - Part 10: Programs
PNE-prEN IEC 62541-13:2024 PROY
OPC Unified Architecture - Part 13: Aggregates
PNE-prEN IEC 62541-14:2024 PROY
OPC Unified Architecture - Part 14: PubSub
PNE-prEN IEC 62541-100:2024 PROY
OPC Unified Architecture - Part 100: Device Interface
ISO/TS 13399-4:2021 ISO
Status: Published/ 2021-11-22
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
ISO/TS 13399-2:2021 ISO
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
ISO/TS 13399-3:2021 ISO
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
ISO/TS 13399-313:2019 ISO
Status: Published/ 2019-04-23
Cutting tool data representation and exchange — Part 313: Creation and exchange of 3D models — Burrs
ISO 22180:2019 ISO
Status: Published/ 2019-01-10
CVD diamond tools — Categorization
ISO/TS 13399-406:2019 ISO
Cutting tool data representation and exchange — Part 406: Creation and exchange of 3D models — Modelling of connection interface
ISO/TS 13399-403:2018 ISO
Status: Published/ 2018-11-29
Cutting tool data representation and exchange — Part 403: Creation and exchange of 3D models — Modelling of driven tool units
ISO/TS 13399-315:2018 ISO
Status: Published/ 2018-10-23
Cutting tool data representation and exchange — Part 315: Creation and exchange of 3D models — Modelling of machine operated feed out tools
ISO/TS 13399-306:2018 ISO
Status: Published/ 2018-09-05
Cutting tool data representation and exchange — Part 306: Creation and exchange of 3D models — Drills and countersinking tools for indexable inserts
ISO/TS 13399-314:2018 ISO
Status: Published/ 2018-08-16
Cutting tool data representation and exchange — Part 314: Creation and exchange of 3D models — Cartridges for indexable inserts
ISO 16084:2017 ISO
Status: Published/ 2017-10-25
Balancing of rotating tools and tool systems
ISO 3364:2017 ISO
Status: Published/ 2017-08-09
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
ISO/TS 13399-80:2017 ISO
Status: Published/ 2017-05-10
Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles
ISO 1832:2017 ISO
Status: Published/ 2017-02-27
Indexable inserts for cutting tools — Designation
ISO/TS 13399-310:2017 ISO
Status: Published/ 2017-02-06
Cutting tool data representation and exchange — Part 310: Creation and exchange of 3D models — Turning tools with carbide tips
