Clear filters Apply
Results for:
Number of results 42
UNE 15450-9:2003 UNE
Status: Vigente/ 2023-05-25
Machine-tools. Test conditions for machining centres. Part 9: Evaluation of the operating times of tool change and pallet change.
UNE-EN ISO 11064-4:2013 UNE
Status: Vigente/ 2015-04-01
Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013) (Endorsed by AENOR in April of 2015.)
UNE-EN ISO 11064-5:2008 UNE
Status: Vigente/ 2009-12-01
Ergonomic design of control centres - Part 5: Displays and controls (ISO 11064-5:2008) (Endorsed by AENOR in December of 2009.)
UNE 15450-8:2003 ERRATUM UNE
Status: Vigente/ 2003-11-21
Machine-tools. Test conditions for machining centres. Part 8: Evaluation of the contouring performance in the three coordinate planes.
UNE 15450-8:2001 UNE
Status: Vigente/ 2001-03-29
UNE 15450-5:2000 UNE
Status: Vigente/ 2000-11-10
Machine-tools. Test conditions of machining centres. Part 5: Accuracy and repeatability of positioning of working-holding pallets.
UNE 15450-1:2000 UNE
Status: Vigente/ 2000-09-30
Machine-tools. Test conditions of machining centres. Part 1: Geometric test for machines with horizontal spindle and with accessory heads (horizontal Z axis).
UNE 15450-4:2000 UNE
Status: Vigente/ 2000-09-21
Machine-tools. Test conditions for machining centres. Part 4: Accuracy and repeatability of positioning of linear and rotary axes.
UNE 15450-2:2004 UNE
Status: Vigente/ 2004-03-12
Machine-tools. Test conditions for machining centres. Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z axis).
UNE 15450-3:2000 UNE
Machine-tools. Test conditions of machining centres. Part 3: Geometric test for machines with integral indexable or continuous universal heads (horizontal Z axis).
ISO 10791-2:2023 ISO
Status: Published/ 2023-04-21
Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle (vertical Z-axis)
ISO 10791-10:2022 ISO
Status: Published/ 2022-09-22
Test conditions for machining centres — Part 10: Evaluation of thermal distortions
ISO 17543-1:2020 ISO
Status: Published/ 2020-03-31
Machine tools — Test conditions for universal spindle heads — Part 1: Accessory heads for machines with horizontal spindle (horizontal Z-axis)
ISO 10791-7:2020 ISO
Status: Published/ 2020-01-29
Test conditions for machining centres — Part 7: Accuracy of finished test pieces
ISO 10791-1:2015 ISO
Status: Published/ 2015-01-21
Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)
ISO 10791-6:2014 ISO
Status: Published/ 2014-12-05
Test conditions for machining centres — Part 6: Accuracy of speeds and interpolations
ISO 10791-8:2001 ISO
Status: Published/ 2001-03-29
Test conditions for machining centres — Part 8: Evaluation of contouring performance in the three coordinate planes
ISO 10791-9:2001 ISO
Status: Published/ 2001-03-15
Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
ISO 10791-3:1998/Cor 1:1999 ISO
Status: Published/ 1999-11-11
Test conditions for machining centres — Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis) — Technical Corrigendum 1
ISO 10791-3:1998 ISO
Status: Published/ 1998-12-20
Test conditions for machining centres — Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)
ISO 10791-4:1998 ISO
Status: Published/ 1998-06-18
Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
ISO 10791-5:1998 ISO
Status: Published/ 1998-02-26
Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
ISO 9524:1993 ISO
Status: Published/ 1993-09-09
Machine tools — Front faces of spindle holders for machining centres — Functional dimensions
PNE-ISO 10791-2 PROY
Status: Procedure
UNE-ISO 10791-10:2009 UNE
Status: Anulada/ 2022-11-10
Machine tools. Conditions for machining centres. Part 10:Determination of thermal distorsions
UNE-EN 12417:2002+A2:2009 UNE
Status: Anulada/ 2021-05-01
Machine tools - Safety - Machining centres
UNE-EN 12417:2002+A2:2009/AC:2010 UNE
UNE 15450-7:2000 UNE
Status: Anulada/ 2018-01-25
Machine-tools. Test conditions for machining centres. Part 7: Accuracy of a finished test piece.
UNE 15450-6:2000 UNE
Machine-tools. Test conditions of machining centres. Part 6: Accuracy of feeds, speeds and interpolations.
UNE 15450-6:2000 ERRATUM:2005 UNE
UNE-EN ISO 11064-4:2005 UNE
Status: Anulada/ 2015-04-01
Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2004)
UNE-EN 12417:2002 UNE
Status: Anulada/ 2009-12-29
MACHINE TOOLS. SAFETY. MACHINING CENTRES.
UNE-EN 12417:2002/A1:2006 UNE
UNE 25075:1953 UNE
Status: Anulada/ 2000-12-14
MECHANIZED CENTER FOR FINISHED AXLES AND ELEMENTS OF FINISHED AXLES.
UNE-EN ISO 16090-1:2018 UNE
Status: Anulada/ 2023-11-08
Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017)
ISO 10791-7:2014 ISO
Status: Withdrawn/ 2014-11-20
ISO 10791-10:2007 ISO
Status: Withdrawn/ 2007-02-28
ISO 10791-6:1998/Cor 1:2004 ISO
Status: Withdrawn/ 2004-03-31
Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations — Technical Corrigendum 1
ISO 10791-2:2001 ISO
Status: Withdrawn/ 2001-03-15
Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
ISO 10791-1:1998 ISO
Status: Withdrawn/ 1998-09-10
Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)
ISO 10791-6:1998 ISO
Status: Withdrawn/ 1998-07-02
Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations
ISO 10791-7:1998 ISO
Status: Withdrawn/ 1998-02-19
Test conditions for machining centres — Part 7: Accuracy of a finished test piece
