Clear filters Apply
Results for:
Number of results 50
UNE-CEN/TS 12200-2:2017 UNE
Status: Vigente/ 2024-10-04
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in April of 2017.)
UNE-EN 1455-1:2023 UNE
Status: Vigente/ 2023-12-20
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
UNE-EN 1566-1:2023 UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
UNE-EN 14758-1:2023 UNE
Status: Vigente/ 2023-11-22
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
UNE-EN 12889:2023 UNE
Status: Vigente/ 2023-11-15
Trenchless construction and testing of drains and sewers
UNE-EN 752:2018 UNE
Status: Vigente/ 2023-11-02
Drain and sewer systems outside buildings - Sewer system management
UNE-CEN/TS 14632:2023 UNE
Status: Vigente/ 2023-11-01
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in November of 2023.)
UNE-EN 1852-1:2018+A1:2023 UNE
Status: Vigente/ 2023-02-15
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
UNE-EN 476:2022 UNE
Status: Vigente/ 2022-12-21
General requirements for components used in drains and sewers
UNE-EN 1453-1:2017 UNE
Status: Vigente/ 2022-10-26
Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system. (Consolidated version)
UNE 53929:2022 UNE
Status: Vigente/ 2022-07-20
Plastics. Rehabilitation of supply and sewerage pipes with continuous cured tubes in situ (CIPP). Design, calculation and installation
UNE-EN 13476-3:2019+A1:2022 UNE
Status: Vigente/ 2022-05-25
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
UNE-EN 13476-2:2019+A1:2022 UNE
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
UNE-EN 1329-1:2022 UNE
Status: Vigente/ 2022-04-13
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
UNE-EN 13598-2:2022 UNE
Status: Vigente/ 2022-03-09
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
UNE-EN 13598-1:2022 UNE
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers
UNE-CEN/TS 13598-3:2021 UNE
Status: Vigente/ 2022-02-01
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Assessment of conformity (Endorsed by Asociación Española de Normalización in February of 2022.)
UNE-CEN/TS 1046:2021 UNE
Status: Vigente/ 2021-09-01
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation (Endorsed by Asociación Española de Normalización in September of 2021.)
UNE-CEN/TS 1329-2:2021 UNE
Status: Vigente/ 2021-03-01
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in March of 2021.)
UNE-CEN/TR 17179:2018 UNE
Status: Vigente/ 2018-04-01
Thermoplastics piping and ducting systems - Rainwater infiltration and storage attenuation systems - Practices for underground installation (Endorsed by Asociación Española de Normalización in April of 2018.)
UNE-EN ISO 13260:2012/A1:2017 UNE
Status: Vigente/ 2017-12-05
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
PNE-EN 752:2017/prA1 PROY
Status: Procedure
Drain and sewer systems outside buildings — Sewer system management
PNE-prEN 12666-1 PROY
Plastics piping systems for non-pressure underground drains and sewers - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
PNE-FprCEN/TS 13476-4 PROY
Plastics piping systems for non-pressure underground drains and sewers - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Assessment of conformity
PNE-prEN ISO 11300-2 PROY
Piping systems for rehabilitation of underground drains, sewers and water supply networks-Part 2: Thermoset composite materials (ISO/DIS 11300-2:2025)
PNE-FprCEN/TS 14758-2 PROY
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 2: Assessment of conformity
PNE-prEN 1329-1 PROY
PNE-FprCEN/TS 12201-7 PROY
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 7: Assessment of conformity
PNE-prEN 13476-2 PROY
Plastics piping systems for non-pressure underground drains and sewers - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
PNE-prEN 13476-3 PROY
Plastics piping systems for non-pressure underground drains and sewers - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
UNE-EN 1566-1:1999 UNE
Status: Anulada/ 2023-12-20
PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
UNE-EN 1455-1:2000 UNE
PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM
Status: Anulada/ 2022-10-26
Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system
UNE-EN 13476-2:2019 UNE
Status: Anulada/ 2022-05-25
UNE-EN 13476-3:2019 UNE
UNE-EN 1329-1:2014+A1:2018 UNE
Status: Anulada/ 2022-04-13
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems
UNE-EN 13598-2:2017 UNE
Status: Anulada/ 2022-03-09
UNE-ENV 1455-2:2002 UNE
Status: Anulada/ 2021-04-08
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity.
UNE-ENV 1566-2:2002 UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for the assessment of conformity.
UNE-CEN/TS 1329-2:2018 UNE
Status: Anulada/ 2021-03-01
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
UNE-EN 1565-1:1999 UNE
Status: Anulada/ 2019-10-17
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system
UNE-ENV 1565-2:2002 UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN+PVC). Part 2: Guidance for the assessment of conformity.
UNE-EN 13476-3:2018 UNE
Status: Anulada/ 2019-09-25
UNE-EN 13476-2:2018 UNE
UNE-ENV 1329-2:2002 UNE
Status: Anulada/ 2018-12-26
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity.
UNE-EN 1451-1:1999 UNE
Status: Anulada/ 2018-07-25
PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
UNE-EN 1451-1:2001 ERRATUM UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Part 1: Specifications for pipes, fittings and the system.
UNE-EN 1329-1:2014 UNE
Status: Anulada/ 2018-06-27
UNE-ENV 1453-2:2001 UNE
Status: Anulada/ 2017-07-26
Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity.
UNE-EN 1453-1:2000 UNE
Status: Anulada/ 2017-05-17
Plastics piping systems with structured wall-pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system
