Clear filters Apply
Results for:
Number of results 58
UNE-EN 6081:2022 UNE
Status: Vigente/ 2023-02-01
Aerospace series - Rivet, universal head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.)
UNE-EN 6101:2022 UNE
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.)
UNE-EN 6069:2022 UNE
Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.)
UNE-EN 6080:2022 UNE
Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.)
UNE-EN ISO 16585:2003 UNE
Status: Vigente/ 2008-02-04
Closed end blind rivets with pull mandrel and protruding head. A2/SSt (ISO 16585:2002)
UNE-EN ISO 15984:2003 UNE
Open end blind rivets with break pull mandrel and countersunk head. A2/A2 (ISO 15984:2002)
UNE-EN ISO 16582:2003 UNE
Open end blind rivets with break pull mandrel and protruding head. Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)
UNE-EN ISO 15975:2003 UNE
Closed end blind rivets with break pull mandrel and protrudiing head. AI/AIA (ISO 15975:2002).
UNE-EN ISO 15976:2003 UNE
Closed end blind rivets with break pull mandrel and protruding head. St/St (ISO15976:2002).
UNE-EN ISO 16583:2003 UNE
Open end blind rivets with break pull mandrel and countersunk head. Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
UNE-EN ISO 16584:2003 UNE
Open end blind rivets with break pull mandrel and protruding head. NiCu/St or NiCu/SSt (ISO 16584:2002)
UNE-EN ISO 15978:2003 UNE
Open end blind rivets with break pull mandrel and countersunk head. AIA/St (ISO 15978:2002)
UNE-EN ISO 15980:2003 UNE
Open end blind rivets with break pull mandrel and countersunk head. St/St (ISO 15980:2002)
UNE-EN ISO 15981:2003 UNE
Open end blind rivets with break pull mandrell and protruding head. AIA/AIA (ISO 15981:2002)
UNE-EN ISO 15983:2003 UNE
Open end blind rivets with break pull mandrel and protruding head. A2/A2 (ISO 15983:2002)
UNE-EN ISO 15977:2003 UNE
Open end blind rivets with break pull mandrel and protruding head. AIA/St (ISO 15977:2001)
UNE-EN ISO 15979:2003 UNE
Open end blind rivets with break pull mandrel and protruding head. St/St (ISO 15979:2002)
UNE-EN ISO 8751:2008 UNE
Status: Vigente/ 2008-01-16
Spring-type straight pins - Coiled, light duty (ISO 8751:2007)
UNE-EN ISO 15982:2003 UNE
Status: Vigente/ 2003-07-11
Open end blind rivets with break pull mandrel and countersrunk head. AIA/AIA (ISO 15982:2002)
UNE-EN ISO 15973:2002 UNE
Status: Vigente/ 2002-06-27
CLOSED END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - AIA/ST. (ISO 15973:2000).
UNE-EN ISO 14588:2002 UNE
Status: Vigente/ 2002-04-29
BLIND RIVETS - TERMINOLOGY AND DEFINITIONS. (ISO 14588:2000).
UNE-EN ISO 14589:2002 UNE
BLIND RIVETS - MECHANICAL TESTING. (ISO 14589:2000).
UNE-EN ISO 15974:2002 UNE
Closed end blind rivets with break pull mandrel and countersunk head. AIA/St. (ISO 15974:2000).
UNE 28640:1988 UNE
Status: Vigente/ 1988-04-08
AEROSPACE SERIES. REPRESENTATION OF RIVETS ON DRAWINGS FOR AEROSPACE EQUIPMENT.
UNE 7246:1974 UNE
Status: Vigente/ 1974-04-15
DETERMINATION OF SHEAR RESISTANCE OF STEEL RIVETS AND SCREWS.
UNE 25161:1963 UNE
Status: Vigente/ 1963-01-15
SELECTIVE LIST OF THE HOLE DIAMETERS FOR STEEL RIVET SETTING (2-20 MM DIAMETERS).
UNE 25162:1963 UNE
SELECTIVE LIST OF THE MEASURES OF ROUNDHEAD STEEL RIVET FOR ANOTHER USE THAN THE BOILER FORGE.
ISO 15975:2002 ISO
Status: Published/ 2002-10-22
Closed end blind rivets with break pull mandrel and protruding head — AI/AIA
ISO 15977:2002 ISO
Open end blind rivets with break pull mandrel and protruding head — AIA/St
ISO 15978:2002 ISO
Open end blind rivets with break pull mandrel and countersunk head — AIA/St
ISO 15979:2002 ISO
Open end blind rivets with break pull mandrel and protruding head — St/St
ISO 15980:2002 ISO
Open end blind rivets with break pull mandrel and countersunk head — St/St
ISO 15981:2002 ISO
Open end blind rivets with break pull mandrel and protruding head — AIA/AIA
ISO 15982:2002 ISO
Open end blind rivets with break pull mandrel and countersunk head — AIA/AIA
ISO 15976:2002 ISO
Closed end blind rivets with break pull mandrel and protruding head — St/St
ISO 15983:2002 ISO
Open end blind rivets with break pull mandrel and protruding head — A2/A2
ISO 15984:2002 ISO
Open end blind rivets with break pull mandrel and countersunk head — A2/A2
ISO 16582:2002 ISO
Open end blind rivets with break pull mandrel and protruding head — Cu/St or Cu/Br or Cu/SSt
ISO 16583:2002 ISO
Open end blind rivets with break pull mandrel and countersunk head — Cu/St or Cu/Br or Cu/SSt
ISO 16584:2002 ISO
Open end blind rivets with break pull mandrel and protruding head — NiCu/St or NiCu/SSt
ISO 16585:2002 ISO
Closed end blind rivets with pull mandrel and protruding head — A2/SSt
ISO 14589:2000 ISO
Status: Published/ 2000-12-21
Blind rivets — Mechanical testing
ISO 14588:2000 ISO
Blind rivets — Terminology and definitions
ISO 15973:2000 ISO
Closed end blind rivets with break pull mandrel and protruding head — AlA/St
ISO 15974:2000 ISO
Closed end blind rivets with break pull mandrel and countersunk head — AlA/St
ISO 1051:1999 ISO
Status: Published/ 1999-11-25
Rivet shank diameters
UNE-EN 6069:2009 UNE
Status: Anulada/ 2023-02-01
Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series (Endorsed by AENOR in January of 2010.)
UNE-EN 6081:2016 UNE
Aerospace series - Rivet, universal head, close tolerance - Inch series (Endorsed by AENOR in October of 2016.)
UNE-EN 6101:2016 UNE
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series (Endorsed by AENOR in October of 2016.)
UNE-EN 6080:2016 UNE
Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series (Endorsed by AENOR in October of 2016.)
