Clear filters Apply
Results for:
Number of results 67
UNE-EN 14399-7:2019 UNE
Status: Vigente/ 2024-03-11
High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
UNE-EN 14399-5:2016 UNE
Status: Vigente/ 2023-04-16
High-strength structural bolting assemblies for preloading - Part 5: Plain washers
UNE-EN 14399-6:2016 UNE
High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers
UNE 22783:1985 UNE
Status: Vigente/ 2022-07-14
BOLTING. PLATES.
UNE-EN ISO 10644:2010 UNE
Status: Vigente/ 2010-02-24
Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009)
UNE-EN ISO 10673:2010 UNE
Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A (ISO 10673:2009)
UNE-EN 28738:1993 UNE
Status: Vigente/ 2008-02-04
PLAIN WASHERS FOR CLEVILS PINS. PRODUCT GRADE A. (ISO 8738:1986).
UNE-EN ISO 887:2000/AC:2006 UNE
Status: Vigente/ 2006-04-19
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000/Cor. 1:2006)
UNE-EN ISO 7093-1:2000 UNE
Status: Vigente/ 2000-12-14
Plain washers. Large series. Part 1: Product grade A. (ISO 7093-1:2000).
UNE-EN ISO 7093-2:2000 UNE
Plain washers. Large series. Part 2: Product grade C. (ISO 7093-2:2000).
UNE-EN ISO 7094:2000 UNE
Plain washers. Exta large series. Product grade C. (ISO 7094:2000).
UNE-EN ISO 7089:2000 UNE
Status: Vigente/ 2000-12-12
Plain washers. Normal series. Product grade A. (ISO 7089:2000).
UNE-EN ISO 7090:2000 UNE
Plain washers, chamfered. Normal series. Product grade A. (ISO7090:2000).
UNE-EN ISO 7091:2000 UNE
Plain washers. Normal series. Product grade C. (ISO 7091:2000).
UNE-EN ISO 7092:2000 UNE
Plain washers. Small series. Product grade A. (ISO 7092:2000).
UNE-EN ISO 887:2000 UNE
Plain washers for metric bolts, screws and nuts for general purposes - General plan. (ISO 887:2000).
UNE 22785:1985 UNE
BOLTING. WASHERS.
UNE-EN ISO 4759-3:2017 UNE
Status: Vigente/ 2017-12-13
Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016)
ISO 898-3:2018/Amd 1:2020 ISO
Status: Published/ 2020-08-11
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes — Amendment 1
ISO 898-3:2018 ISO
Status: Published/ 2018-05-28
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes
ISO 4759-3:2016 ISO
Status: Published/ 2016-06-01
Tolerances for fasteners — Part 3: Washers for bolts, screws and nuts — Product grades A, C and F
ISO 10644:2009 ISO
Status: Published/ 2009-06-16
Screw and washer assemblies made of steel with plain washers — Washer hardness classes 200 HV and 300 HV
ISO 10673:2009 ISO
Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A
ISO 887:2000/Cor 1:2006 ISO
Status: Published/ 2006-02-07
Plain washers for metric bolts, screws and nuts for general purposes — General plan — Technical Corrigendum 1
ISO 7094:2000/Cor 1:2000 ISO
Status: Published/ 2000-11-30
Plain washers — Extra large series — Product grade C — Technical Corrigendum 1
ISO 887:2000 ISO
Status: Published/ 2000-06-08
Plain washers for metric bolts, screws and nuts for general purposes — General plan
ISO 7093-1:2000 ISO
Plain washers — Large series — Part 1: Product grade A
ISO 7094:2000 ISO
Plain washers — Extra large series — Product grade C
ISO 7093-2:2000 ISO
Plain washers — Large series — Part 2: Product grade C
ISO 7089:2000 ISO
Status: Published/ 2000-06-01
Plain washers — Normal series — Product grade A
ISO 7090:2000 ISO
Plain washers, chamfered — Normal series — Product grade A
ISO 7091:2000 ISO
Plain washers — Normal series — Product grade C
ISO 7092:2000 ISO
Plain washers — Small series — Product grade A
ISO 10669:1999 ISO
Status: Published/ 1999-08-19
Plain washers for tapping screw and washer assemblies — Normal and large series — Product grade A
ISO 8738:1986 ISO
Status: Published/ 1986-11-06
Plain washers for clevis pins — Product grade A
ISO 3506-7 ISO
Status: Draft/ 0 - -
Fasteners — Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 7: Flat washers with specified grades and property classes
UNE 28638:1988 UNE
Status: Anulada/ 2021-04-08
AEROSPACE SERIES. WASHERS, LOCK WITH RADIAL SERRATIONS IN ALLOY STEEL. DIMENSIONS.
UNE-EN 14399-7:2009 UNE
Status: Anulada/ 2019-04-10
UNE-EN 14399-6:2009 UNE
Status: Anulada/ 2016-12-01
UNE-EN 14399-5:2009 UNE
UNE-EN ISO 10644:1999 UNE
Status: Anulada/ 2010-02-24
SCREW AND WASHER ASSEMLIES WITH PLAIN WASHERS. PART 1: WASHER HARDNESS CLASSES 200 HV AND 300 HV. (ISO 10644:1998).
UNE-EN ISO 10673:1999 UNE
PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES. SMALL, NORMAL AND LARGE SERIES. PRODUCT GRADE A. (ISO 10673:1998).
UNE-EN 14399-5:2005 UNE
Status: Anulada/ 2009-05-27
High-strength structural bolting assemblies for preloading - Part 5: Plain washers (Endorsed by AENOR in August of 2006.)
UNE-EN 14399-6:2005 UNE
High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers (Endorsed by AENOR in August of 2006.)
UNE 17065:1966 UNE
Status: Anulada/ 1998-07-09
BLACK PLATE WASHERS. DIMENSIONS.
UNE 17066:1968 UNE
POLISHING PLATE WASHERS FOR SCREW AND HEXAGONAL NUT. DIMENSIONS.
UNE 17069:1964 UNE
POLISHING PLATE WASHERS. REDUCED TYPE. DIMENSIONS.
UNE 17078:1965 UNE
RETAINING SPRING WASHERS FOR SHAFTS.
UNE-EN ISO 4759-3:2000 UNE
Status: Anulada/ 2017-12-13
Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Products grades A and C (ISO 4759-3:2000)
UNE 25179:1964 UNE
Status: Anulada/ 2000-12-14
SEAT WASHER OF THE BRAKE RELEASE VALVES, TYPE F AND TYPE CID FOR THE VACUUM BRAKE DRUMS.
