Clear filters Apply
Results for:
Number of results 113
UNE-EN IEC 61010-2-201:2024 UNE
Status: Current/ 2025-01-01
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment (Endorsed by Asociación Española de Normalización in January of 2025.)
UNE-EN ISO 23131:2023 UNE
Status: Vigente/ 2023-09-13
Ellipsometry - Principles (ISO 23131:2021)
UNE-ISO/IEC GUIA 98-3:2012 IN UNE
Status: Vigente/ 2023-08-04
Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
UNE 82210:2023 UNE
Status: Vigente/ 2023-07-05
Field procedures for the assessment of the centring uncertainty of geodetic and surveying instruments.
UNE 82009-6:1999 UNE
Status: Vigente/ 2022-09-07
ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 6: USE IN PRACTICE OF ACCURACY VALUES.
UNE-EN IEC 61010-2-130:2021 UNE
Status: Vigente/ 2021-07-01
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-130: Particular requirements for equipment intended to be used in educational establishments by children
UNE-EN IEC 61010-2-202:2021 UNE
Status: Vigente/ 2021-02-01
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators (Endorsed by Asociación Española de Normalización in February of 2021.)
UNE 80407:2014 UNE
Status: Vigente/ 2021-01-01
Metrological control of measuring equipment used in the cement test
UNE-EN IEC 62828-4:2020 UNE
Status: Vigente/ 2020-11-01
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters (Endorsed by Asociación Española de Normalización in November of 2020.)
UNE-EN IEC 62828-5:2020 UNE
Reference conditions and procedures for testing Industrial and process measurement transmitters - Part 5: Specific procedures for flow transmitters (Endorsed by Asociación Española de Normalización in November of 2020.)
UNE-EN IEC 62828-3:2018 UNE
Status: Vigente/ 2018-08-01
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN IEC 61010-2-201:2018 UNE
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN IEC 62828-2:2018 UNE
Status: Vigente/ 2018-03-01
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters (Endorsed by Asociación Española de Normalización in March of 2018.)
UNE-EN IEC 62828-1:2018 UNE
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters (Endorsed by Asociación Española de Normalización in March of 2018.)
UNE-EN 62974-1:2018 UNE
Status: Vigente/ 2018-02-28
Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
UNE 66180:2008 UNE
Status: Vigente/ 2016-01-21
Quality management systems. Guide for the metrological management and assessment.
UNE-EN 62703:2013 UNE
Status: Vigente/ 2013-10-01
Expression of performance of fluorometric oxygen analyzers in liquid media (Endorsed by AENOR in October of 2013.)
UNE 400331:2003 IN UNE
Status: Vigente/ 2012-01-10
Determination of uncertainty for volume measurements made using the gravimetric method.
UNE-EN 62419:2009 UNE
Status: Vigente/ 2009-05-01
Control technology - Rules for the designation of measuring instruments (Endorsed by AENOR in May of 2009.)
UNE-EN 60746-3:2004 UNE
Status: Vigente/ 2004-01-23
Expression of performance of electrochemical analyzers -- Part 3: Electrolytic conductivity
UNE-EN ISO 10012:2003 ERRATUM UNE
Status: Vigente/ 2003-10-17
Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003)
UNE-EN ISO 10012:2003 UNE
Status: Vigente/ 2003-04-30
UNE 82009-5:1999 UNE
Status: Vigente/ 1999-06-28
ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
UNE 20804:1987 UNE
Status: Vigente/ 1987-06-15
DIMENSIONS OF PANEL AREAS AND CUT-OUTS FOR PANEL AND RACK-MOUNTED INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL INSTRUMENTS
UNE-ISO/IEC GUIA 99:2012 IN UNE
Status: Vigente/ 2012-02-15
International vocabulary of metrology. Basics and general concepts and associated terms (VIM)
ISO/IEC Guide 98-1:2024 ISO
Status: Published/ 2024-02-12
Guide to the expression of uncertainty in measurement — Part 1: Introduction
ISO 5725-1:2023 ISO
Status: Published/ 2023-07-20
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
ISO 5725-3:2023 ISO
Status: Published/ 2023-06-28
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
ISO/TS 27878:2023 ISO
Status: Published/ 2023-01-24
Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
ISO 24185:2022 ISO
Status: Published/ 2022-08-25
Evaluation of the uncertainty of measurements from a stationary autocorrelated process
ISO/TR 11843-8:2021 ISO
Status: Published/ 2021-11-22
Capability of detection — Part 8: Guidance for the implementation of the ISO 11843 series
ISO 23131:2021 ISO
Status: Published/ 2021-04-22
Ellipsometry — Principles
ISO/IEC Guide 98-6:2021 ISO
Status: Published/ 2021-02-09
Uncertainty of measurement — Part 6: Developing and using measurement models
ISO 5725-4:2020 ISO
Status: Published/ 2020-03-26
Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 5725-2:2019 ISO
Status: Published/ 2019-12-06
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 11843-6:2019 ISO
Status: Published/ 2019-02-18
Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
ISO/TS 28038:2018 ISO
Status: Published/ 2018-12-17
Determination and use of polynomial calibration functions
ISO 11843-7:2018 ISO
Status: Published/ 2018-09-05
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
ISO 11843-5:2008/Amd 1:2017 ISO
Status: Published/ 2017-05-12
Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases — Amendment 1
ISO 21748:2017 ISO
Status: Published/ 2017-04-24
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
ISO/TR 21074:2016 ISO
Status: Published/ 2016-10-24
Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
ISO/TS 17503:2015 ISO
Status: Published/ 2015-11-06
Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using two-factor crossed designs
ISO/IEC Guide 98-4:2012 ISO
Status: Published/ 2012-11-19
Uncertainty of measurement — Part 4: Role of measurement uncertainty in conformity assessment
ISO/IEC Guide 98-3:2008/Suppl 2:2011 ISO
Status: Published/ 2011-11-09
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) — Supplement 2: Extension to any number of output quantities
ISO/IEC Guide 98-3:2008/Suppl 1:2008/Cor 1:2009 ISO
Status: Published/ 2009-05-07
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) — Supplement 1: Propagation of distributions using a Monte Carlo method — Technical Corrigendum 1
ISO/IEC Guide 98-3:2008/Suppl 1:2008 ISO
Status: Published/ 2008-11-20
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) — Supplement 1: Propagation of distributions using a Monte Carlo method
ISO/IEC Guide 98-3:2008 ISO
Status: Published/ 2008-09-30
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
ISO 11843-5:2008 ISO
Status: Published/ 2008-05-22
Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
ISO/IEC Guide 99:2007 ISO
Status: Published/ 2007-12-14
International vocabulary of metrology — Basic and general concepts and associated terms (VIM)
ISO 11843-2:2000/Cor 1:2007 ISO
Status: Published/ 2007-10-23
Capability of detection — Part 2: Methodology in the linear calibration case — Technical Corrigendum 1
