Find your standard

UNE-CWA 17379:2019  UNE

Status: Vigente/ 2023-06-28

General guideline on real drive test methodology for compiling comparable emission data (Endorsed by Asociación Española de Normalización in June of 2019.)

UNE-EN 50545-1:2012  UNE

Status: Vigente/ 2023-01-18

Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides

UNE-CEN/TS 17378:2019  UNE

Status: Vigente/ 2019-11-01

Intelligent transport systems - Urban ITS - Air quality management in urban areas (Endorsed by Asociación Española de Normalización in November of 2019.)

UNE-EN 50545-1:2012/A1:2016  UNE

Status: Vigente/ 2016-05-04

Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides

ISO 23795-2:2024  ISO

Status: Published/ 2024-02-02

Intelligent transport systems — Extracting trip data using nomadic and mobile devices for estimating CO2 emissions — Part 2: Information provision for eco-friendly driving behaviour

ISO 15031-3:2023  ISO

Status: Published/ 2023-02-06

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits: Specification and use

ISO 6460-3:2007/Amd 2:2022  ISO

Status: Published/ 2022-12-06

Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed — Amendment 2

ISO 23795-1:2022  ISO

Status: Published/ 2022-05-31

Intelligent transport systems — Extracting trip data using nomadic and mobile devices for estimating C02 emissions — Part 1: Fuel consumption determination for fleet management

ISO 6460-1:2022  ISO

Status: Published/ 2022-02-10

Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 1: General test requirements

ISO 8178-2:2021  ISO

Status: Published/ 2021-12-23

Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions

ISO 8178-5:2021  ISO

Status: Published/ 2021-05-17

Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels

ISO 8178-4:2020  ISO

Status: Published/ 2020-06-24

Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state and transient test cycles for different engine applications

ISO 8178-1:2020  ISO

Status: Published/ 2020-06-24

Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions

ISO 17479:2013/Amd 1:2020  ISO

Status: Published/ 2020-05-06

Motorcycles — Measurement methods for gaseous exhaust emissions during inspection or maintenance — Amendment 1

ISO 21755-2:2020  ISO

Status: Published/ 2020-02-28

Motorcycles — Measurement method for evaporative emissions — Part 2: Permeation test procedure

ISO 8178-9:2019  ISO

Status: Published/ 2019-07-22

Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter

ISO 21755-1:2019  ISO

Status: Published/ 2019-07-15

Motorcycles — Measurement method for evaporative emissions — Part 1: SHED test procedure

ISO 8178-3:2019  ISO

Status: Published/ 2019-01-30

Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter

ISO 16232:2018  ISO

Status: Published/ 2018-12-12

Road vehicles — Cleanliness of components and systems

ISO 8178-6:2018  ISO

Status: Published/ 2018-04-24

Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test

ISO 19449:2015  ISO

Status: Published/ 2015-12-09

Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance

ISO 6460-3:2007/Amd 1:2015  ISO

Status: Published/ 2015-11-06

Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed — Amendment 1

ISO 8178-8:2015  ISO

Status: Published/ 2015-08-17

Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination

ISO 15031-5:2015  ISO

Status: Published/ 2015-07-28

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services

ISO 15031-6:2015  ISO

Status: Published/ 2015-07-28

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions

ISO 8178-7:2015  ISO

Status: Published/ 2015-07-23

Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination

ISO 18854:2015  ISO

Status: Published/ 2015-04-10

Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions

ISO 6460-2:2014  ISO

Status: Published/ 2014-11-24

Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 2: Test cycles and specific test conditions

ISO 15031-4:2014  ISO

Status: Published/ 2014-02-05

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment

ISO 15031-7:2013  ISO

Status: Published/ 2013-07-22

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 7: Data link security

ISO 17479:2013  ISO

Status: Published/ 2013-04-11

Motorcycles — Measurement methods for gaseous exhaust emissions during inspection or maintenance

ISO 6855-1:2012  ISO

Status: Published/ 2012-09-20

Mopeds — Measurement method for gaseous exhaust emissions and fuel consumption — Part 1: General test requirements

ISO 6855-2:2012  ISO

Status: Published/ 2012-09-20

Mopeds — Measurement method for gaseous exhaust emissions and fuel consumption — Part 2: Test cycles and specific test conditions

ISO 6855-3:2012  ISO

Status: Published/ 2012-09-20

Mopeds — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed

ISO 15031-1:2010  ISO

Status: Published/ 2010-12-06

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 1: General information and use case definition

ISO 15031-2:2010  ISO

Status: Published/ 2010-08-20

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 2: Guidance on terms, definitions, abbreviations and acronyms

ISO 6460-3:2007  ISO

Status: Published/ 2007-07-23

Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed

ISO 3929:2003  ISO

Status: Published/ 2003-08-21

Road vehicles — Measurement methods for exhaust gas emissions during inspection or maintenance

ISO 16183:2002  ISO

Status: Published/ 2002-12-09

Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions

ISO 11614:1999  ISO

Status: Published/ 1999-09-23

Reciprocating internal combustion compression-ignition engines — Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas

ISO 10054:1998  ISO

Status: Published/ 1998-09-10

Internal combustion compression-ignition engines — Measurement apparatus for smoke from engines operating under steady-state conditions — Filter-type smokemeter

ISO 789-4:1986  ISO

Status: Published/ 1986-10-16

Agricultural tractors — Test procedures — Part 4: Measurement of exhaust smoke

UNE-EN 13444-1:2002  UNE

Status: Anulada/ 2014-06-05

ELECTRICALLY PROPELLED ROAD VEHICLES. MEASUREMENT OF EMISSIONS OF HYBRID VEHICLES. PART 1: THERMAL ELECTRIC HYBRID VEHICLES.

UNE-EN ISO 8178-4:1997  UNE

Status: Anulada/ 2009-03-26

RECIPROCATING INTERNAL COMBUSTION ENGINES. EXHAUST EMISSION MEASUREMENT. PART 4: TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS. (ISO 8178-4:1996).

UNE-EN ISO 8178-1:1997  UNE

Status: Anulada/ 2009-03-26

RECIPROCATING INTERNAL COMBUSTION ENGINES. EXHAUST EMISSION MEASUREMENT. PART 1: TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS. (ISO 8178-1:1996).

UNE-EN ISO 8178-2:1997  UNE

Status: Anulada/ 2009-03-26

RECIPROCATING INTERNAL COMBUSTION ENGINES. EXHAUST EMISSION MEASUREMENT. PART 2: MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS AT SITE (ISO 8178-2:1996).

UNE 10082:1977  UNE

Status: Anulada/ 2004-10-14

MEASURE OF CO-EMISSIONS OF RALENTI VEHICLES.

UNE 10080:1989  UNE

Status: Anulada/ 2004-06-03

DEVICES CALIBRATION TO MEASURE THE CONTENT OF CARBON MONOXIDE IN THE EXHAUST BUNTGASES OF ROAD VEHICLES.

UNE 10081:1985  UNE

Status: Anulada/ 2004-02-05

ROAD VEHICLES. APPARATUS FOR MEASUREMENT OF THE OPACITY OF EXHAUST GAZ FROM DIESEL ENGINES OPERATING UNDER ESTEADY STATE CONDITIONS.

UNE-EN ISO 8178-6:2001  UNE

Status: Anulada/ 2010-04-08

Reciprocating internal combustion engines. Exhaust emission measurement. Part 6: Report of measuring results and test. (ISO 8178-6:2000)