Clear filters Apply
Results for:
Number of results 343
UNE-EN ISO 6508-1:2024 UNE
Status: Vigente/ 2024-07-10
Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)
UNE-EN ISO 6508-2:2024 UNE
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2023)
UNE-EN ISO 6508-3:2024 UNE
Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2023)
UNE-ISO 7800:2024 UNE
Status: Current/2024-05-29
Metallic materials. Wire. Simple torsion test.
UNE-EN ISO 4545-1:2024 UNE
Status: Current/2024-05-22
Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2023)
UNE-EN ISO 6507-1:2024 UNE
Status: Vigente/ 2024-05-14
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2023)
UNE-EN ISO 204:2024 UNE
Status: Vigente/ 2024-04-10
Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2023)
UNE-EN ISO 3785:2024 UNE
Status: Vigente/ 2024-02-28
Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2023)
UNE-ISO 23718:2024 UNE
Status: Vigente/ 2024-02-14
Metallic materials. Mechanical testing. Vocabulary.
UNE-EN ISO 14556:2023 UNE
Status: Vigente/ 2023-12-20
Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2023)
UNE-EN ISO 16808:2023 UNE
Status: Vigente/ 2023-01-18
Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2022)
UNE-EN 10371:2022 UNE
Status: Vigente/ 2022-02-02
Metallic materials - Small punch test method
UNE-EN ISO 10275:2021 UNE
Status: Vigente/ 2021-11-03
Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent (ISO 10275:2020)
UNE-EN ISO 12004-1:2021 UNE
Status: Vigente/ 2021-09-08
Metallic materials - Determination of forming-limit curves for sheet and strip - Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2020)
UNE-EN ISO 12004-2:2021 UNE
Status: Vigente/ 2021-06-16
Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
UNE-EN ISO 7438:2021 UNE
Status: Vigente/ 2021-05-19
Metallic materials - Bend test (ISO 7438:2020)
UNE-EN ISO 6892-1:2020 UNE
Status: Vigente/ 2020-07-22
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)
UNE-EN ISO 10113:2020 UNE
Status: Vigente/ 2021-01-13
Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2020, Corrected version 2020-11)
UNE-EN ISO 204:2019 UNE
Status: Anulada/ 2024-04-10
Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2018)
UNE-EN ISO 6506-2:2019 UNE
Status: Vigente/ 2019-09-25
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2017)
UNE-EN ISO 6892-2:2018 UNE
Status: Vigente/ 2018-10-31
Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018)
UNE-EN ISO 6507-1:2018 UNE
Status: Anulada/ 2024-05-14
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2018)
UNE-EN ISO 6507-4:2018 UNE
Status: Vigente/ 2018-10-17
Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018)
UNE-EN ISO 6507-2:2018 UNE
Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018)
UNE-EN ISO 6507-3:2018 UNE
Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018)
UNE-EN ISO 4545-3:2018 UNE
Status: Vigente/ 2018-06-27
Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017)
UNE-EN ISO 4545-1:2018 UNE
Status: Anulada/ 2024-05-22
Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2017)
UNE-EN ISO 4545-2:2018 UNE
Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2017)
UNE-EN ISO 7500-1:2018 UNE
Status: Vigente/ 2018-05-16
Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)
UNE-EN ISO 26203-1:2018 UNE
Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems (ISO 26203-1:2018)
UNE-EN ISO 4545-4:2018 UNE
Status: Vigente/ 2018-03-28
Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017)
UNE-EN ISO 14577-4:2017 UNE
Status: Vigente/ 2017-07-19
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016)
UNE-EN ISO 148-1:2017 UNE
Status: Vigente/ 2017-04-19
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
UNE-EN ISO 148-2:2017 UNE
Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016)
UNE-EN ISO 148-3:2017 UNE
Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016)
UNE-EN ISO 6892-1:2017 UNE
Status: Anulada/ 2020-07-22
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
UNE-EN ISO 6508-1:2017 UNE
Status: Anulada/ 2024-07-10
Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
UNE-EN ISO 7438:2016 UNE
Status: Anulada/ 2021-05-19
Metallic materials - Bend test (ISO 7438:2016)
UNE-EN ISO 7500-1:2016 UNE
Status: Anulada/ 2018-05-16
Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2015)
UNE-EN ISO 14577-2:2016 UNE
Status: Vigente/ 2016-01-13
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015)
UNE-EN ISO 14577-1:2016 UNE
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)
UNE-EN ISO 14577-3:2016 UNE
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
UNE-EN ISO 16859-1:2016 UNE
Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015)
UNE-EN ISO 16859-2:2016 UNE
Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015)
UNE-EN ISO 16859-3:2016 UNE
Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks (ISO 16859-3:2015)
UNE-EN ISO 6892-3:2015 UNE
Status: Vigente/ 2015-11-11
Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015)
UNE-EN ISO 6508-2:2015 UNE
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015)
UNE-EN ISO 6508-3:2015 UNE
Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)
UNE-EN ISO 6508-1:2015 UNE
Status: Anulada/ 2017-02-01
Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2015)
UNE-EN ISO 16808:2015 UNE
Status: Anulada/ 2023-01-18
Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2014)
