Clear filters Apply
Results for:
Number of results 690
UNE-EN ISO 16486-2:2025 UNE
Status: Vigente/ 2025-07-02
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes (ISO 16486-2:2024)
UNE 53944:2019 IN UNE
Status: Vigente/ 2025-06-17
Plastics Water evacuation systems (at low and high temperature) including syphonic systems, inside the structure of buildings and for rain gutters and drainpipes on the outside. Recommended practices for installation.
UNE-EN 12118:1998 UNE
Status: Vigente/ 2025-02-11
PLASTICS PIPING SYSTEMS. DETERMINATION OF MOISTURE CONTENT IN THERMOPLASTICS BY COULOMETRY.
UNE-EN 12099:1997 UNE
PLASTICS PIPING SYSTEMS. POLYETHYLENE PIPING MATERIALS AND COMPONENTS. DETERMINATION OF VOLATILE CONTENT.
UNE-CEN/TS 1452-7:2014 UNE
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity (Endorsed by AENOR in May of 2014.)
UNE-EN 17176-5:2019 UNE
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
UNE-EN 17176-2:2019+A1:2023 UNE
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
UNE-CEN/TS 18116:2024 UNE
Status: Vigente/ 2025-02-01
Thermoplastics pipes and fittings - Design for recycling guidelines (Endorsed by Asociación Española de Normalización in February of 2025.)
UNE-EN 12201-3:2024/AC:2025 UNE
Status: Current/ 2025-01-22
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
UNE 53331:2024 UNE
Status: Vigente/ 2024-12-18
Plastics. Unplastized poly(vinyl chloride), oriented unplasticized poly(vinyl chloride) (PVC-O), polyethylene (PE) and polypropylene (PP) pipes. Criterion for the assessment of pipes for plastics piping systems with car without pressure under external loads.
UNE-EN ISO 8233:2024 UNE
Status: Vigente/ 2024-10-30
Thermoplastics valves - Torque - Test method (ISO 8233:2024)
UNE-CEN/TS 1453-2:2017 UNE
Status: Vigente/ 2024-10-04
Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
UNE-CEN/TS 12200-2:2017 UNE
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in April of 2017.)
UNE-CEN/TS 1519-2:2020 UNE
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE 53394:2018 IN UNE
Status: Vigente/ 2024-10-02
Plastics. Code for the installation and handling of polyethylene (PE) pipes for water piping under pressure. Recommended techniques
UNE-CEN/TS 17152-4:2024 UNE
Status: Vigente/ 2024-10-01
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 4: Guidance for structural design of modular systems (Endorsed by Asociación Española de Normalización in October of 2024.)
UNE-EN 12201-5:2024 UNE
Status: Vigente/ 2024-09-18
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
UNE-EN 12201-2:2024 UNE
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes
UNE-EN 12201-4:2024 UNE
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 4: Valves for water supply systems
UNE-EN 12201-3:2024 UNE
UNE-EN 12201-1:2024 V2 UNE
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 1: General
UNE-EN ISO 16486-1:2024 UNE
Status: Vigente/ 2024-07-24
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2023)
UNE 53008-2:2024 UNE
Status: Vigente/ 2024-07-17
Plastics piping systems. Multilayer pipe systems for gas installations pipework with a maximum operating pressure up to and including 5 bar (500 kPa). Part 2: Design, installation and maintenance
UNE-EN 17670-2:2024 UNE
Status: Vigente/ 2024-07-03
Plastics piping systems for non-pressure underground conveyance of surface water - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specification for road gullies
UNE-EN ISO 7510:2024 UNE
Status: Current/2024-06-12
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017)
UNE-EN 13766:2019+A1:2021 UNE
Status: Vigente/ 2024-06-06
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
UNE-EN 13765:2019 UNE
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
UNE-EN ISO 2505:2024 UNE
Status: Vigente/ 2024-04-30
Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2023)
UNE-EN ISO 10468:2024 UNE
Status: Vigente/ 2024-04-10
Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)
UNE-CEN/TS 17152-3:2022/AC:2024 UNE
Status: Vigente/ 2024-03-01
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Assessment of conformity (Endorsed by Asociación Española de Normalización in March of 2024.)
UNE-EN 1555-2:2022 UNE
Status: Vigente/ 2024-01-03
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
UNE-ISO 13953:2023 UNE
Status: Vigente/ 2023-12-20
Polyethylene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint.
UNE-EN 1455-1:2023 UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
UNE-EN 1566-1:2023 UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
UNE-EN ISO 11296-9:2023 UNE
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
UNE-CEN/TS 1455-2:2023 UNE
Status: Vigente/ 2023-12-01
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity (Endorsed by Asociación Española de Normalización in December of 2023.)
UNE-CEN/TS 1566-2:2023 UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity (Endorsed by Asociación Española de Normalización in December of 2023.)
UNE-EN 14758-1:2023 UNE
Status: Vigente/ 2023-11-22
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
UNE-CEN ISO/TS 16486-7:2023 UNE
Status: Vigente/ 2023-11-01
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 7: Assessment of conformity (ISO/TS 16486-7:2023) (Endorsed by Asociación Española de Normalización in November of 2023.)
UNE-CEN/TS 14632:2023 UNE
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in November of 2023.)
UNE-EN ISO 13266:2023 UNE
Status: Vigente/ 2023-10-31
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
UNE-EN ISO 13267:2023 UNE
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
UNE-EN ISO 13268:2023 UNE
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
UNE 53008-1:2014 UNE
Status: Vigente/ 2023-06-19
Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa). Part 1: Specifications for pipes, fittings and the system
UNE-EN 14420-2:2023 UNE
Status: Vigente/ 2023-05-10
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
UNE-EN 802:1995 UNE
Status: Vigente/ 2023-02-25
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
UNE-EN ISO 13479:2023 UNE
Status: Vigente/ 2023-02-15
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022)
UNE-EN 1852-1:2018+A1:2023 UNE
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
UNE-EN ISO 15874-2:2013/A2:2023 UNE
Status: Vigente/ 2023-01-18
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
UNE-EN ISO 15874-1:2013/A1:2023 UNE
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
