Clear filters Apply
Results for:
Number of results 1.292
UNE-EN 10090:1998 UNE
Status: Vigente/ 2025-08-12
VALVE STEELS AND ALLOYS FOR INTERNAL COMBUSTION ENGINES.
UNE-EN 10095:2000 UNE
Heat resisting steels and nickel alloys
UNE-EN 10088-4:2010 UNE
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
UNE-EN 10088-5:2010 UNE
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
UNE-EN 10205:2025 UNE
Status: Vigente/ 2025-07-02
Cold reduced tinmill products - Blackplate
UNE-EN 10265:2025 UNE
Magnetics materials - Specification for electrical steel strip and sheet with specified mechanical properties and magnetic polarisation
UNE-EN ISO 683-7:2025 UNE
Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels (ISO 683-7:2023)
UNE-EN ISO 4937:2025 UNE
Steel and iron - Determination of chromium content - Potentiometric or visual titration method (ISO 4937:2024)
UNE-EN 10334:2025 UNE
Status: Vigente/ 2025-06-18
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate)
UNE-EN 10335:2025 UNE
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel
UNE-EN 10333:2025 UNE
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate)
UNE-EN 10224:2003 UNE
Status: Vigente/ 2025-06-05
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
UNE-EN 10266:2007 UNE
Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
UNE-EN 10298:2007 UNE
Steel tubes and fittings for on shore and offshore pipelines - Internal lining with cement mortar
UNE-EN 10294-1:2008 UNE
Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels
UNE-EN 10229:1998 UNE
Status: Vigente/ 2025-05-15
Evaluation of resistance of steel products to hydrogen induced cracking (HIC)
UNE-EN 10325:2007 UNE
Steel - Determination of yield strength increase by the effect of heat treatment [Bake-Hardening-Index]
UNE-EN 14585:2025 UNE
Status: Vigente/ 2025-05-07
Corrugated metal hose assemblies for pressure applications
UNE-EN ISO 9658:2025 UNE
Status: Vigente/ 2025-04-23
Steel - Determination of aluminium content - Flame atomic absorption spectrometric method (ISO 9658:2024)
UNE-EN ISO 643:2025 UNE
Steels - Micrographic determination of the apparent grain size (ISO 643:2024)
UNE-EN ISO 10714:2025 UNE
Steel and iron - Determination of phosphorus content - Phosphovanadomolybdate spectrophotometric method (ISO 10714:2024)
UNE-EN ISO 642:2025 UNE
Steel - Hardenability test by end quenching (Jominy test) (ISO 642:2024)
UNE-EN 10163-3:2007 UNE
Status: Vigente/ 2025-04-02
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections
UNE-EN 10163-1:2007 UNE
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements
UNE-EN 10163-2:2007 UNE
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
UNE-EN 10238:2011 UNE
Automatically blast-cleaned and automatically prefabrication primed structural steel products
UNE-EN 10025-3:2020 UNE
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
UNE-EN 10025-6:2020+A1:2023 UNE
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
UNE-EN 10343:2010 UNE
Status: Vigente/ 2025-03-31
Steels for quenching and tempering for construction purposes - Technical delivery conditions
UNE-EN 10241:2001 UNE
Status: Vigente/ 2025-03-05
Steel threaded pipe fittings.
UNE-EN 10288:2002 UNE
Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
UNE-EN 10268:2007+A1:2013 UNE
Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
UNE-EN 10218-1:2012 UNE
Status: Vigente/ 2025-02-06
Steel wire and wire products - General - Part 1: Test methods
UNE-EN 10264-1:2012 UNE
Steel wire and wire products - Steel wire for ropes - Part 1: General requirements
UNE-EN 10218-2:2012 UNE
Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
UNE-EN 10223-2:2013 UNE
Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes
UNE-EN 10223-5:2013 UNE
Steel wire and wire products for fencing and netting - Part 5: Steel wire woven hinged joint and knotted mesh fencing
UNE-EN 10223-6:2013 UNE
Steel wire and wire products for fencing and netting - Part 6: Steel wire chain link fencing
UNE-EN 10223-4:2013 UNE
Steel wire and wire products for fencing and netting - Part 4: Steel wire welded mesh fencing
UNE-EN 10223-7:2013 UNE
Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing
UNE-EN 10223-1:2013 UNE
Steel wire and wire products for fencing and netting - Part 1: Zinc and zinc-alloy coated steel barbed wire
UNE-EN 10223-3:2014 UNE
Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
UNE-EN 10223-8:2014 UNE
Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
UNE-EN 10271:1999 UNE
Status: Current/ 2025-01-22
Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
UNE-EN 10178:2025 UNE
Status: Vigente/ 2025-01-15
Steels - Determination of niobium - Spectrophotometric method
UNE-EN 10179:2025 UNE
Steels - Determination of nitrogen (trace amounts) - Spectrophotometric method
UNE-EN 10188:2025 UNE
Steels and cast irons - Determination of chromium content - Flame atomic absorption spectrometric method (FAAS)
UNE-EN 10248-2:2025 UNE
Hot-rolled steel sheet piles - Part 2: Tolerances on dimensions and shape
UNE-EN 10249-2:2025 UNE
Cold formed steel sheet piles - Part 2: Tolerances on dimensions and shape
UNE-EN 10348:2025 UNE
Steel for the reinforcement of concrete - Galvanized reinforcing steel products
Number of results 1292
