Clear filters Apply
Results for:
Number of results 430
UNE-EN IEC 60512-99-002:2022/A1:2025 UNE
Status: Vigente/ 2025-07-01
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (Endorsed by Asociación Española de Normalización in July of 2025.)
UNE-EN IEC 63171:2025 UNE
Connectors for electrical and electronic equipment - Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity - General requirements and tests (Endorsed by Asociación Española de Normalización in July of 2025.)
UNE-EN IEC 61076-2-101:2025 UNE
Status: Vigente/ 2025-02-01
Connectors for electrical and electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking (Endorsed by Asociación Española de Normalización in February of 2025.)
UNE-EN IEC 60352-2:2024 UNE
Status: Current/ 2025-01-01
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in January of 2025.)
UNE-EN IEC 63171-5:2022/AC:2024-11 UNE
Connectors for electrical and electronic equipment - Part 5: Detail specification for 2-way m8 and m12 circular connectors, shielded or unshielded, free and fixed - Mechanical mating information, pin assignment and additional requirements for type 5 (Endorsed by Asociación Española de Normalización in January of 2025.)
UNE-EN IEC 60512-28-100:2024 UNE
Status: Current/ 2024-12-01
Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g (Endorsed by Asociación Española de Normalización in December of 2024.)
UNE-EN 175301-803:2006 UNE
Status: Current/2024-06-12
Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable (Endorsed by AENOR in December of 2006.)
UNE-EN IEC 60352-9:2024 UNE
Status: Vigente/ 2024-05-01
Solderless connections - Part 9: Ultrasonically welded connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in May of 2024.)
UNE-EN 175201-804:1999 UNE
Status: Vigente/ 2024-02-15
Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling (Endorsed by AENOR in June of 2000.)
UNE-EN 175300:1997 UNE
SECTIONAL SPECIFICATION: RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ.
UNE-EN 175101-802:1999 UNE
Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows (Endorsed by AENOR in June of 2000.)
UNE-EN 175101-809:2004 UNE
Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality (Endorsed by AENOR in July of 2004.)
UNE-EN 175101-809:2004 CORR:2005 UNE
Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality (Endorsed by AENOR in September of 2005.)
UNE-EN 175301-801:2006 UNE
Detail Specification: High density rectangular connectors, round removable crimp contacts (Endorsed by AENOR in March of 2007.)
UNE-EN IEC 61969-3:2024 UNE
Status: Vigente/ 2024-02-01
Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects (Endorsed by Asociación Española de Normalización in February of 2024.)
UNE-EN IEC 60512-99-003:2023 UNE
Status: Vigente/ 2023-12-01
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-003: Endurance test schedules - Test 99c: Test schedule for balanced single-pair connectors separating (unmating) under electrical load (Endorsed by Asociación Española de Normalización in December of 2023.)
UNE-EN IEC 61076-3-106:2023 UNE
Status: Vigente/ 2023-10-01
Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface (Endorsed by Asociación Española de Normalización in October of 2023.)
UNE-EN IEC 61076-2-115:2023 UNE
Status: Vigente/ 2023-08-01
Connectors for electrical and electronic equipment - Product requirements - Part 2-115: Circular connectors - Detail specification for 12-pole shielded connectors with 2 A rated current and IP65/IP67 metal housing with push-pull locking (Endorsed by Asociación Española de Normalización in August of 2023.)
UNE-EN IEC 61969-1:2023 UNE
Status: Vigente/ 2023-05-01
Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines (Endorsed by Asociación Española de Normalización in May of 2023.)
UNE-EN IEC 61076-3-126:2023 UNE
Status: Vigente/ 2023-04-01
Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking (Endorsed by Asociación Española de Normalización in April of 2023.)
UNE-EN IEC 60352-6:2023 UNE
Status: Vigente/ 2023-03-01
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in March of 2023.)
UNE-EN IEC 61076-2-116:2023 UNE
Connectors for electrical and electronic equipment - Product requirements - Part 2 -116: Detail specification for circular connectors size 15 with up to 3+PE power contacts and auxiliary contacts, with bayonet-locking (Endorsed by Asociación Española de Normalización in March of 2023.)
UNE-EN IEC 60512-27-200:2022 UNE
Status: Vigente/ 2022-12-01
Connectors for electrical and electronic equipment - Tests and measurements - Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors - Tests 27a to 27g (Endorsed by Asociación Española de Normalización in December of 2022.)
UNE-EN IEC 63171-5:2022 UNE
Connectors for electrical and electronic equipment - Part 5: Detail specification for 2-way M8 and M12 circular connectors, shielded or unshielded, free and fixed - Mechanical mating information, pin assignment and additional requirements for Type 5 (Endorsed by Asociación Española de Normalización in December of 2022.)
UNE-EN IEC 60512-99-002:2022 UNE
Status: Vigente/ 2022-04-01
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (Endorsed by Asociación Española de Normalización in April of 2022.)
UNE-EN IEC 61587-1:2022 UNE
Status: Vigente/ 2022-03-01
Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test setups and safety aspects (Endorsed by Asociación Española de Normalización in March of 2022.)
UNE-EN IEC 61076-2-010:2021 UNE
Status: Vigente/ 2021-10-01
Connectors for electrical and electronic equipment - Product requirements - Part 2-010: Circular connectors - Detail specification for connectors with outer or inner push-pull locking mechanism, based on mating interfaces according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 and IEC 61076-2-113 (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN IEC 61076-2-011:2021 UNE
Connectors for electrical and electronic equipment - Product requirements - Part 2-011: Circular connectors - Detail specification for B12 bayonet coupling connectors based on mating interfaces according to IEC 61076-2-101 and IEC 61076-2-109 (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN IEC 61076-3-122:2021 UNE
Status: Vigente/ 2021-07-01
Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz and current-carrying capacity in industrial environments (Endorsed by Asociación Española de Normalización in July of 2021.)
UNE-EN IEC 61587-6:2021 UNE
Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets (Endorsed by Asociación Española de Normalización in July of 2021.)
UNE-EN IEC 63171:2021 UNE
Status: Vigente/ 2021-05-01
Connectors for electrical and electronic equipment - Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity - General requirements and tests (Endorsed by Asociación Española de Normalización in May of 2021.)
UNE-EN IEC 60352-7:2021 UNE
Status: Vigente/ 2021-03-01
Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in March of 2021.)
UNE-EN IEC 61076-2-114:2020 UNE
Status: Vigente/ 2021-01-01
Connectors for electrical and electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for connectors with M8 screw-locking with power contacts and signal contacts for data transmission up to 100 MHz (Endorsed by Asociación Española de Normalización in January of 2021.)
UNE-EN IEC 60603-7:2020 UNE
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (Endorsed by Asociación Española de Normalización in January of 2021.)
UNE-EN IEC 62966-2:2020 UNE
Status: Vigente/ 2020-11-01
Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 2: Details of air flow, air separation and air cooling requirements (Endorsed by Asociación Española de Normalización in November of 2020.)
UNE-EN IEC 60352-5:2020 UNE
Status: Vigente/ 2020-10-01
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in October of 2020.)
UNE-EN IEC 61076-2-012:2020 UNE
Connectors for electrical and electronic equipment - Product Requirements - Part 2-012: Circular connectors - Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 and IEC 61076-2-113 (Endorsed by Asociación Española de Normalización in October of 2020.)
UNE-EN IEC 61969-3:2020 UNE
Status: Vigente/ 2020-09-01
Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-EN IEC 60512-9-5:2020 UNE
Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-EN IEC 60352-4:2020 UNE
Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-EN IEC 61969-1:2020 UNE
Status: Vigente/ 2020-08-01
Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines (Endorsed by Asociación Española de Normalización in August of 2020.)
UNE-EN IEC 60352-3:2020 UNE
Status: Vigente/ 2020-07-01
Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in July of 2020.)
UNE-EN IEC 61076-8-100:2020 UNE
Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A (Endorsed by Asociación Española de Normalización in July of 2020.)
UNE-EN IEC 61076-8-101:2020 UNE
Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A (Endorsed by Asociación Española de Normalización in July of 2020.)
UNE-EN IEC 61076-8-102:2020 UNE
Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A (Endorsed by Asociación Española de Normalización in July of 2020.)
UNE-EN IEC 63171-1:2020 UNE
Connectors for electrical and electronic equipment - Part 1: Detail specification for two-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style (Endorsed by Asociación Española de Normalización in July of 2020.)
UNE-EN IEC 61076-3-124:2019/AC:2020-04 UNE
Status: Vigente/ 2020-06-01
Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz (Endorsed by Asociación Española de Normalización in June of 2020.)
UNE-EN IEC 62610-6:2020 UNE
Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 Series - Part 6: Air recirculation and bypass of indoor cabinets (Endorsed by Asociación Española de Normalización in June of 2020.)
UNE-EN IEC 60512-28-100:2019 UNE
Status: Vigente/ 2020-02-01
Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g (Endorsed by Asociación Española de Normalización in February of 2020.)
UNE-EN IEC 60917-1:2019 UNE
Status: Vigente/ 2019-12-01
Modular order for the development of mechanical structures for electrical and electronic equipment practices - Part 1: Generic standard (Endorsed by Asociación Española de Normalización in December of 2019.)
