Clear filters Apply
Results for:
Number of results 331
UNE 53944:2019 IN UNE
Status: Vigente/ 2025-06-17
Plastics Water evacuation systems (at low and high temperature) including syphonic systems, inside the structure of buildings and for rain gutters and drainpipes on the outside. Recommended practices for installation.
UNE-CEN/TS 1453-2:2017 UNE
Status: Vigente/ 2024-10-04
Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
UNE-CEN/TS 1519-2:2020 UNE
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-EN 13564-2:2003 UNE
Status: Vigente/ 2024-06-13
Anti-flooding devices for buildings - Part 2: Test methods.
UNE-EN 13564-3:2004 UNE
Anti-flooding devices for buildings. Part 3: Quality assurance.
UNE-EN 295-6:2013 UNE
Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for components of manholes and inspection chambers
UNE-EN 295-7:2013 UNE
Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
UNE-EN 295-5:2013 UNE
Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings
UNE-EN 295-1:2013 UNE
Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
UNE-EN 295-2:2013 UNE
Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling
UNE-EN 295-4:2013 UNE
Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
UNE-EN 14366-1:2024 UNE
Status: Current/2024-04-24
Laboratory measurement of airborne and structure-borne sound from service equipment - Part 1: Application rules for waste water installations
UNE-EN 1455-1:2023 UNE
Status: Vigente/ 2023-12-20
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
UNE-EN 1566-1:2023 UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
UNE-EN ISO 11296-9:2023 UNE
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
UNE-CEN/TS 1455-2:2023 UNE
Status: Vigente/ 2023-12-01
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity (Endorsed by Asociación Española de Normalización in December of 2023.)
UNE-CEN/TS 1566-2:2023 UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity (Endorsed by Asociación Española de Normalización in December of 2023.)
UNE-CEN/TS 14632:2023 UNE
Status: Vigente/ 2023-11-01
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in November of 2023.)
UNE-EN ISO 13266:2023 UNE
Status: Vigente/ 2023-10-31
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
UNE-EN ISO 13267:2023 UNE
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
UNE-EN ISO 13268:2023 UNE
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
UNE-EN 1253-6:2023 UNE
Status: Vigente/ 2023-07-05
Gullies for buildings - Part 6: Trapped floor gullies with a depth of water seal less than 50 mm
UNE-EN 1253-7:2023 UNE
Gullies for buildings - Part 7: Trapped floor gullies with mechanical closure
UNE-EN 1253-8:2023 UNE
Gullies for buildings - Part 8: Trapped floor gullies with combined mechanical closure and water seal
UNE-EN 1253-5:2017 UNE
Status: Vigente/ 2022-11-04
Gullies for buildings - Part 5: Gullies with light liquids closure
UNE-EN 1453-1:2017 UNE
Status: Vigente/ 2022-10-26
Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system. (Consolidated version)
UNE-EN 1451-1:2018 UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system. (Consolidated version)
UNE-EN ISO 13257:2020 UNE
Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
UNE-EN 1519-1:2021 UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system
UNE-EN 1123-1:2000 UNE
Status: Vigente/ 2022-06-09
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
UNE-EN 1124-1:2000 UNE
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
UNE-EN 13564-1:2003 UNE
Anti-flooding devices for buildings - Part 1: Requirements
UNE-EN 13101:2003 UNE
Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity
UNE-EN 12380:2003 UNE
Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity.
UNE-EN 1123-2:2007+A1:2007 UNE
Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions
UNE-EN 1253-4:2017 UNE
Gullies for buildings - Part 4: Access covers
UNE-EN 1253-3:2017 UNE
Gullies for buildings - Part 3: Evaluation of conformity
UNE-EN ISO 23856:2022 UNE
Status: Vigente/ 2022-06-01
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
UNE-EN ISO 11296-7:2022 UNE
Status: Vigente/ 2022-05-25
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
UNE-EN 1329-1:2022 UNE
Status: Vigente/ 2022-04-13
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
UNE 149002:2022 UNE
Status: Vigente/ 2022-03-09
Acceptance criteria for disposable products via toilet.
UNE-EN ISO 13259:2022 UNE
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
UNE-EN 12056-3:2001 UNE
Status: Vigente/ 2021-11-18
GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS. PART 3: ROOF DRAINAGE, LAYOUT AND CALCULATION.
UNE-EN ISO 11296-4:2018/A1:2021 UNE
Status: Vigente/ 2021-11-03
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
UNE-EN 12109:1999 UNE
Status: Vigente/ 2021-06-11
Vacuum drainage systems inside buildings
UNE-EN 12056-2:2001 UNE
GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS. PART 2: SANITARY PIPEWORK, LAYOUT AND CALCULATION.
UNE-EN 12056-1:2001 UNE
Gravity drainage systems inside buildings. Part 1: General and performance requirements.
UNE-EN 12056-4:2001 UNE
Gravity drainage systems inside buidlings. Part 4: Wastewater lifting plants. Layout and calculation.
UNE-EN 12056-5:2001 UNE
GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS. PART 5: INSTALLATION AND TESTING, INSTRUCTIONS FOR OPERATION, MAINTENANCE AND USE.
UNE-EN 124-6:2015 UNE
Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
