Clear filters Apply
Results for:
Number of results 97
UNE-EN 16916:2025 UNE
Status: Vigente/ 2025-06-18
Materials obtained from End-of-Life Tyres - Determination of specific requirements for sampling and determination of moisture content using the oven-dry method
UNE-EN 17308:2025 UNE
Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content
UNE-EN 14243-2:2019 UNE
Status: Vigente/ 2025-01-29
Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities, including free steel and free textile content
UNE 53936:2015 EX UNE
Status: Vigente/ 2022-07-12
Materials produced from end of life tyres. Rubber granulates. Determination of textile fiber content by visual rate
UNE-CEN/TS 17045:2020 UNE
Status: Vigente/ 2020-12-01
Materials obtained from end-of-life tyres - Quality criteria for the selection of whole tyres, for recovery and recycling processes (Endorsed by Asociación Española de Normalización in December of 2020.)
UNE-CEN/TS 17510:2020 UNE
Materials obtained from End-of-Life Tyres - Determination of the specific surface area of powders - Method based on krypton adsorption (Endorsed by Asociación Española de Normalización in December of 2020.)
UNE-CEN/TR 17509:2020 UNE
Status: Vigente/ 2020-09-01
Materials obtained from End-of-Life Tyres - Granulated rubber - Determination of textile fiber content by visual index (qualitative method) (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-CEN/TR 17511:2020 UNE
Materials obtained from End-of-Life Tyres - Odour of ELT granulates - Origin and remediation possibilities (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-CEN/TS 17189:2018 UNE
Status: Vigente/ 2020-05-01
Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-CEN/TS 17307:2020 EX UNE
Status: Vigente/ 2020-04-22
Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution
UNE-EN 14243-3:2019 UNE
Status: Vigente/ 2019-11-06
Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips - Methods for determining their dimension(s) including protruding filaments dimensions
UNE-EN 14243-1:2019 UNE
Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities
UNE-CEN/TS 17188:2019 UNE
Status: Vigente/ 2019-04-03
Materials obtained from end of life tyres (ELT) - Sampling method for granulates and powders stored in big-bags
UNE 80602:2011 UNE
Status: Vigente/ 2018-01-11
Determination of biomass fraction in waste tires used as alternative fuel in cement plants
UNE 69050:2017 UNE
Status: Vigente/ 2017-11-29
Tyres, rims and valves. Tyre use cycle. Maintenance, repair and regrooving of tyres manual
UNE 69051:2017 UNE
Tyres, rims and valves. Tyre use cycle. Second-hand tyres
UNE 69026:2007 UNE
Status: Vigente/ 2007-05-30
Tyres, rims and valves. Drop center rims for passenger cars and their trailers.
UNE 69039:2002 UNE
Status: Vigente/ 2002-06-27
Tyres, rims and valves. Tyres for passenger cars. Recommendations for the repair of pneumatic tyres.
UNE 69018:2002 UNE
Status: Vigente/ 2002-04-22
Tyres, rims and valves. Rims. Generalities.
UNE 69001:2001 UNE
Status: Vigente/ 2001-06-18
Tyres, rims and valves. Terminology and definitions.
ISO/TR 16377:2012 ISO
Status: Published/ 2012-07-09
Further clarification of ISO 28580
ISO/TR 29846:2008 ISO
Status: Published/ 2008-05-15
Tyres, valves and tubes — kPa/psi equivalencies for inflation pressures
ISO 24163-1:2024 ISO
Status: Published/ 2024-03-15
Clamp-in tyre valves for tyre pressure monitoring systems — Part 1: Definition, types, dimensions and valve interface
ISO 24163-2:2024 ISO
Status: Published/ 2024-01-09
Clamp-in tyre valves for tyre pressure monitoring systems — Part 2: Test methods and performance
ISO 14960-2:2024 ISO
Status: Published/ 2024-01-08
Tubeless tyres — Valves and components — Part 2: Clamp-in tubeless tyre valve — Test methods
ISO 14960-1:2023 ISO
Status: Published/ 2023-11-08
Tubeless tyres — Valves and components — Part 1: Snap-in tyre valves test methods
ISO 22640:2023 ISO
Status: Published/ 2023-06-20
Rubber — Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
ISO 24469:2023 ISO
Status: Published/ 2023-04-28
Road wear test of studded tyres
ISO 21634:2022 ISO
Status: Published/ 2022-11-01
Rubber flaps for tyres — Requirements and test methods
ISO 18885-3:2021 ISO
Status: Published/ 2021-11-30
TPMS snap-in valves — Part 3: Performances
ISO 23475-1:2021 ISO
Status: Published/ 2021-02-10
Testing method for steel tyre cord — Part 1: General requirements
ISO 4223-2:1991/Amd 1:2020 ISO
Status: Published/ 2020-10-13
Definitions of some terms used in the tyre industry — Part 2: Solid tyres — Amendment 1
ISO 3877-4:1984/Amd 1:2020 ISO
Status: Published/ 2020-08-13
Tyres, valves and tubes — List of equivalent terms — Part 4: Solid tyres — Amendment 1
ISO 20911:2020 ISO
Status: Published/ 2020-04-20
Radio frequency identification (RFID) tyre tags — Tyre attachment classification
ISO 20912:2020 ISO
Conformance test methods for RFID enabled tyres
ISO 9413:2019 ISO
Status: Published/ 2019-11-18
Tyre valves — Dimensions and designation
ISO 20909:2019 ISO
Status: Published/ 2019-08-06
Radio frequency identification (RFID) tyre tags
ISO 20910:2019 ISO
Coding for radio frequency identification (RFID) tyre tags
ISO 18885-2:2018 ISO
Status: Published/ 2018-09-12
TPMS snap-in valves — Part 2: Valve environment
ISO/TS 22687:2018 ISO
Status: Published/ 2018-08-10
Rubber — Framework for assessing the environmental fate of tyre and road wear particles (TRWP)
ISO 28580:2018 ISO
Status: Published/ 2018-07-05
Passenger car, truck and bus tyre rolling resistance measurement method — Single point test and correlation of measurement results
ISO/TS 22638:2018 ISO
Rubber — Generation and collection of tyre and road wear particles (TRWP) — Road simulator laboratory method
ISO 17832:2018 ISO
Status: Published/ 2018-05-03
Non-parallel steel wire and cords for tyre reinforcement
ISO/TS 21396:2017 ISO
Status: Published/ 2017-12-21
Rubber — Determination of mass concentration of tire and road wear particles (TRWP) in soil and sediments — Pyrolysis-GC/MS method
ISO 4223-1:2017 ISO
Status: Published/ 2017-11-23
Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres
ISO 18885-1:2017 ISO
Status: Published/ 2017-07-21
TPMS snap-in valves — Part 1: Identification
ISO 16392:2017 ISO
Status: Published/ 2017-05-22
Tyres — Electrical resistance — Test method for measuring electrical resistance of tyres on a test rig
ISO 17464:2016 ISO
Status: Published/ 2016-01-19
Pneumatic tubes for automotive vehicles — Technical requirements and test methods
ISO 20562:2014 ISO
Status: Published/ 2014-04-10
Tyre valves — ISO core chambers No. 1, No. 2, No. 3 and No. 4
ISO 4570:2002 ISO
Status: Published/ 2002-03-28
Tyre valve threads
