Clear filters Apply
Results for:
Number of results 102
UNE-EN 61587-1:2007 UNE
Status: Anulada/ 2014-12-14
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -- Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis (IEC 61587-1:2007).
UNE-EN 61587-2:2003 UNE
Status: Anulada/ 2014-09-29
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -- Part 2: Seismic tests for cabinets and racks
UNE-EN 61969-3:2002 UNE
Status: Anulada/ 2014-12-22
Mechanical structures for electronic equipment - Outdoor enclosures -- Part 3: Sectional specification - Climatic, mechanical tests and safety aspects for cabinets and cases.
UNE 208003:2002 IN UNE
Status: Vigente/ 2002-03-26
Recommendations for shielded enclosures.
UNE-EN 60917-1/A1:2002 UNE
Status: Anulada/ 2022-10-19
Modular order for the development of mechanical structures for electronic equipment practices - Part 1: Generic standard
UNE-EN 61587-1:2002 UNE
Status: Anulada/ 2010-04-01
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -- Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis.
UNE-EN 60297-5-107:2001 UNE
Status: Anulada/ 2007-09-01
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-107: Subracks and associated plug-in units - Rear mounted plug-in units.
UNE-EN 60297-5-103:2001 UNE
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-103: Subracks and associated plug-in units - Electrostatic discharge protection.
UNE-EN 60297-5-104:2001 UNE
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-104: Subracks and associated plug-in units - Keying.
UNE-EN 60297-5-100:2001 UNE
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-100: Subracks and associated plug-in units - Design overview.
UNE-EN 60297-5-101:2001 UNE
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-101: Subracks and associated plug-in units - Injector/extractor handle.
UNE-EN 60297-5-105:2001 UNE
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-105: Subracks and associated plug-in units - Alignment and/or earth pin.
UNE-EN 60297-5-102:2001 UNE
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-102: Subracks and associated plug-in units - Electromagnetic shielding provision.
UNE-EN 61969-2-2:2001 UNE
Mechanical structures for electronic equipment - Outdoor enclosures. Part 2-2: Detail specification - Dimension for cases.
UNE-EN 61969-1:2001 UNE
Status: Anulada/ 2012-12-22
Mechanical structures for electronic equipment - Outdoor enclosures -- Part 1: Design guidelines.
UNE-EN 61969-2-1:2001 UNE
Mechanical structures for electronic equipment - Outdoor enclosures -- Part 2-1: Detail specification - Dimensions for cabinets.
UNE-EN 60917-1:2001 UNE
UNE-EN 61969-2:2000 UNE
Mechanical structures for electronic equipment - Outdoor enclosures -- Part 2: Sectional specification - Coordination dimensions for cases and cabinets.
UNE-EN 60297-4/A1:2000 UNE
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 4: Subracks and associated plug-in units - Additional dimensions
UNE-EN 60917/A1:1997 UNE
Status: Anulada/ 2001-07-01
MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES.
UNE-EN 60917-2-2:1997 UNE
Status: Vigente/ 1997-09-19
MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES. PART 2: SECTIONAL SPECIFICATION. INTERFACE CO-ORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE. SECTION 2: DETAIL SPECIFICATION. DIMENSIONS FOR SUBRACKS, CHASSIS, BACKPLANES, FRONT PANELS AND PLUG-IN UNITS.
UNE-EN 60297-4:1997 UNE
MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT. DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES. PART 4: SUBRACKS AND ASSOCIATED PLUG-IN UNITS. ADDITIONAL DIMENSIONS.
UNE 20634:1996 UNE
Status: Anulada/ 2021-09-02
Dimensions for the mounting of single-hole, bush-mounted, spindle-operated electronic components
UNE 20539-3:1996 UNE
DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES. PART 3: SUBRACKS AND ASSOCIATED PLUG-IN UNITS.
UNE 20539-1:1996 UNE
Status: Anulada/ 2011-12-01
DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES. PART 1: PANELS AND RACKS.
UNE 20539-2:1996 UNE
DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 INCH) SERIES. PART 2: CABINETS AND PITCHES OF RACK STRUCTURES.
UNE 20916:1995 UNE
MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT. TERMINOLOGY.
UNE-EN 60917:1993 UNE
UNE 20634/1C:1981 UNE
Status: Anulada/ 1996-06-12
DIMENSIONS FOR THE MOUNTING OF SINGLE-HOLE, BUSH-MOUNTED, SPINDLE-OPERATED ELECTRONIC COMPONENTS. WASHERS
UNE 20634:1980 UNE
DIMENSIONS FOR THE MOUNTING OF SINGLE-HOLE, BUSH-MOUNTED, SPINDLE-OPERATED ELECTRONIC COMPONENTS
UNE 20539:1974 UNE
Status: Anulada/ 1996-03-23
RACKS, MODULAR CHASSIS AND PANELS FOR ELECTRONIC EQUIPMENT
UNE-EN 60917-0:1991 UNE
MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES. PART 0: GUIDE FOR THE USERS OF PUBLICATION 917. (Endorsed by AENOR in December of 1995.)
UNE-EN 60917-2:1994 UNE
Status: Vigente/ 1995-12-01
MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES. PART 2: SECTIONAL SPECIFICATION. INTERFACE COORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE. (Endorsed by AENOR in December of 1995.)
UNE-EN 60917-2-1:1995 UNE
MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES. PART 2: SECTIONAL SPECIFICATION. INTERFACE CO-ORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE. SECTION 1: DETAIL SPECIFICATION. DIMENSIONS FOR CABINET AND RACKS. (Endorsed by AENOR in December of 1995.)
UNE-EN 61760-1:1998 UNE
Status: Anulada/ 2009-06-01
SURFACE MOUNTING TECHNOLOGY -- PART 1: STANDARD METHOD FOR THE SPECIFICATION OF SURFACE MOUNTING COMPONENTS (SMDS) (Endorsed by AENOR in February of 1999.)
UNE-EN 60297-3-102:2004 UNE
Status: Vigente/ 2004-11-01
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-102: Injector/extractor handle (Endorsed by AENOR in November of 2004.)
UNE-EN 60297-3-103:2004 UNE
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-103: Keying and alignment pin (Endorsed by AENOR in November of 2004.)
UNE-EN 60297-3-101:2004 UNE
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-101: Subracks and associated plug-in units (Endorsed by AENOR in November of 2004.)
UNE-EN 62194:2005 UNE
Status: Vigente/ 2005-12-01
Method of evaluating the thermal performance of enclosures (Endorsed by AENOR in December of 2005.)
UNE-EN 61760-1:2006 UNE
Status: Anulada/ 2023-08-19
Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)
UNE-EN 60917-2-3:2006 UNE
Status: Vigente/ 2006-09-01
Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Extended detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units (IEC 60917-2-3:2006). (Endorsed by AENOR in September of 2006.)
UNE-EN 60297-3-104:2006 UNE
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-104: Connector dependent interface dimensions of subracks and plug-in units (IEC 60297-3-104:2006 ) (Endorsed by AENOR in September of 2006.)
UNE-EN 61587-3:2006 UNE
Status: Anulada/ 2016-03-14
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks (Endorsed by AENOR in February of 2007.)
UNE-EN 60297-3-105:2009 UNE
Status: Vigente/ 2009-03-01
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-105: Dimensions and design aspects for 1U high chassis (Endorsed by AENOR in March of 2009.)
UNE-EN 60297-3-100:2009 UNE
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets (Endorsed by AENOR in March of 2009.)
UNE-EN 60286-2:2009 UNE
Status: Anulada/ 2018-05-28
Packaging of components for automatic handling - Part 2: Packaging of components with unidirectional leads on continuous tapes (Endorsed by AENOR in March of 2009.)
UNE-EN 60297-3-106:2010 UNE
Status: Vigente/ 2010-07-01
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1 (Endorsed by AENOR in July of 2010.)
UNE-EN 60917-2-4:2010 UNE
Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-4: Sectional specification - Interface coordination dimensions for the 25 mm equipment practice - Adaptation dimensions for subracks or chassis applicable in cabinets or racks in accordance with IEC 60297-3-100 (19 in) (Endorsed by AENOR in July of 2010.)
UNE-EN 61760-3:2010 UNE
Status: Anulada/ 2024-03-11
Surface mounting technology - Part 3: Standard method for the specification of components for Through Hole Reflow (THR) soldering
UNE-EN 61587-2:2011 UNE
Status: Vigente/ 2012-02-01
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks (Endorsed by AENOR in February of 2012.)
