Clear filters Apply
Results for:
Number of results 112
UNE-EN IEC 60512-99-002:2022/A1:2025 UNE
Status: Vigente/ 2025-07-01
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (Endorsed by Asociación Española de Normalización in July of 2025.)
UNE-EN IEC 60512-99-002:2022 UNE
Status: Vigente/ 2022-04-01
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (Endorsed by Asociación Española de Normalización in April of 2022.)
UNE-EN IEC 60512-9-5:2020 UNE
Status: Vigente/ 2020-09-01
Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-EN IEC 60512-11-1:2019 UNE
Status: Vigente/ 2019-08-01
Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-EN 50625-1:2014 UNE
Status: Vigente/ 2019-05-08
Collection, logistics & Treatment requirements for WEEE - Part 1: General treatment requirements
UNE-EN IEC 60512-23-3:2019 UNE
Status: Vigente/ 2019-04-01
Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method (Endorsed by Asociación Española de Normalización in April of 2019.)
UNE-EN IEC 60512-1:2018 UNE
Status: Current/2019-01-01
Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in January of 2019.)
UNE-CLC/TR 50625-6:2018 IN UNE
Status: Vigente/ 2018-10-24
Collection, logistics & treatment requirements for WEEE - Part 6: Report on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614
UNE-EN IEC 60512-8-3:2018 UNE
Status: Vigente/ 2018-05-01
Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever (Endorsed by Asociación Española de Normalización in May of 2018.)
UNE-CLC/TS 50625-5:2017 UNE
Status: Vigente/ 2017-11-01
Collection, logistics & Treatment requirements for WEEE - Part 5: Specification for the final treatment of WEEE fractions - Copper and precious metals (Endorsed by Asociación Española de Normalización in November of 2017.)
UNE-CLC/TS 50625-3-4:2017 UNE
Collection, logistics & treatment requirements for WEEE - Part 3-4: Specification for de-pollution - temperature exchange equipment (Endorsed by Asociación Española de Normalización in November of 2017.)
UNE-CLC/TS 50625-3-3:2017 UNE
Collection, logistics & treatment requirements for WEEE - Part 3-3: Specification for de-pollution - WEEE containing CRTs and flat panel displays (Endorsed by Asociación Española de Normalización in November of 2017.)
UNE-EN 50625-2-2:2015 UNE
Status: Vigente/ 2015-11-25
Collection, logistics & Treatment requirements for WEEE - Part 2-2: Treatment requirements for WEEE containing CRTs and flat panel displays
UNE-EN 60512-29-100:2015 UNE
Status: Vigente/ 2015-11-01
Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g (Endorsed by AENOR in November of 2015.)
UNE-EN 50625-2-1:2015 UNE
Status: Vigente/ 2015-06-24
Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatment requirements for lamps
UNE-IEC 60050-581:2009 UNE
Status: Current/2015-01-23
International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
UNE-EN 60512-24-1:2012 UNE
Status: Vigente/ 2013-01-01
Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism (Endorsed by AENOR in January of 2013.)
UNE-EN 60512-99-001:2012 UNE
Status: Vigente/ 2012-12-01
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power (Endorsed by AENOR in December of 2012.)
UNE-EN 60512-1-100:2012 UNE
Status: Vigente/ 2012-09-19
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
UNE-EN 60512-16-21:2012 UNE
Status: Vigente/ 2012-09-01
Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses (Endorsed by AENOR in September of 2012.)
UNE-EN 60512-7-2:2011 UNE
Status: Vigente/ 2012-04-01
Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact (Endorsed by AENOR in April of 2012.)
UNE-EN 60512-9-4:2011 UNE
Status: Vigente/ 2011-09-01
Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing) (Endorsed by AENOR in September of 2011.)
UNE-EN 60512-17-2:2011 UNE
Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation (Endorsed by AENOR in September of 2011.)
UNE-EN 60512-8-2:2011 UNE
Connectors for electronic equipment - Tests and measurements -- Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial (Endorsed by AENOR in September of 2011.)
UNE-EN 60512-23-2:2010 UNE
Status: Vigente/ 2010-11-01
Connectors for electronic equipment - Tests and measurements -- Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters (Endorsed by AENOR in November of 2010.)
UNE-EN 60512-8-1:2010 UNE
Connectors for electronic equipment - Tests and measurements -- Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse (Endorsed by AENOR in November of 2010.)
UNE-EN 60512-17-1:2010 UNE
Connectors for electronic equipment - Tests and measurements -- Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness (Endorsed by AENOR in November of 2010.)
UNE-EN 60512-17-4:2010 UNE
Connectors for electronic equipment - Tests and measurements -- Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion (Endorsed by AENOR in November of 2010.)
UNE-EN 60512-17-3:2010 UNE
Connectors for electronic equipment - Tests and measurements -- Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile) (Endorsed by AENOR in November of 2010.)
UNE-EN 60512-21-1:2010 UNE
Status: Vigente/ 2010-10-01
Connectors for electronic equipment - Tests and measurements -- Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance (Endorsed by AENOR in October of 2010.)
UNE-EN 60512-20-1:2010 UNE
Connectors for electronic equipment - Tests and measurements -- Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame (Endorsed by AENOR in October of 2010.)
UNE-EN 60512-22-1:2010 UNE
Connectors for electronic equipment - Tests and measurements -- Part 22-1: Capacitance tests - Test 22a: Capacitance (Endorsed by AENOR in October of 2010.)
UNE-EN 60512-20-3:2010 UNE
Connectors for electronic equipment - Tests and measurements -- Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire (Endorsed by AENOR in October of 2010.)
UNE-EN 60512-7-1:2010 UNE
Status: Vigente/ 2010-09-01
Connectors for electronic equipment - Tests and measurements -- Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated) (Endorsed by AENOR in September of 2010.)
UNE-EN 60512-16-3:2008 UNE
Status: Vigente/ 2009-02-01
Connectors for electronic equipment - Tests and measurements -- Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (Endorsed by AENOR in February of 2009.)
UNE-EN 60512-16-5:2008 UNE
Connectors for electronic equipment - Tests and measurements -- Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (Endorsed by AENOR in February of 2009.)
UNE-EN 60512-16-6:2008 UNE
Connectors for electronic equipment - Tests and measurements -- Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations (Endorsed by AENOR in February of 2009.)
UNE-EN 60512-16-7:2008 UNE
Connectors for electronic equipment - Tests and measurements -- Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (Endorsed by AENOR in February of 2009.)
UNE-EN 60512-16-16:2008 UNE
Connectors for electronic equipment - Tests and measurements -- Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs (Endorsed by AENOR in February of 2009.)
UNE-EN 60512-16-17:2008 UNE
Connectors for electronic equipment - Tests and measurements -- Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs (Endorsed by AENOR in February of 2009.)
UNE-EN 60512-16-14:2008 UNE
Connectors for electronic equipment - Tests and measurements -- Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs (Endorsed by AENOR in February of 2009.)
UNE-EN 60512-16-18:2008 UNE
Status: Vigente/ 2008-11-01
Connectors for electronic equipment - Tests and measurements -- Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation (Endorsed by AENOR in November of 2008.)
UNE-EN 60512-16-9:2008 UNE
Connectors for electronic equipment- Tests and measurements- Part 16-9: Mechanical tests on contacts and terminations- Test 16i:Grounding contact spring holding force (Endorsed by AENOR in November of 2008.)
UNE-EN 60512-16-1:2008 UNE
Connectors for electronic equipment - Tests and measurements -- Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage (Endorsed by AENOR in November of 2008.)
UNE-EN 60512-16-2:2008 UNE
Connectors for electronic equipment - Tests and measurements -- Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry (Endorsed by AENOR in November of 2008.)
UNE-EN 60512-16-4:2008 UNE
Connectors for electronic equipment - Tests and measurements -- Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) (Endorsed by AENOR in November of 2008.)
UNE-EN 60512-16-8:2008 UNE
Connectors for electronic equipment - Tests and measurements -- Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) (Endorsed by AENOR in November of 2008.)
UNE-EN 60512-16-11:2008 UNE
Connectors for electronic equipment - Tests and measurements -- Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections (Endorsed by AENOR in November of 2008.)
UNE-EN 60512-16-13:2008 UNE
Connectors for electronic equipment - Tests and measurements -- Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections (Endorsed by AENOR in November of 2008.)
UNE-EN 60512-13-1:2006 CORR:2007 UNE
Status: Vigente/ 2007-05-09
Connectors for electronic equipment - Tests and measurements -- Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
