Clear filters Apply
Results for:
Number of results 24
UNE-EN 12418:2022 UNE
Status: Vigente/ 2022-07-27
Masonry and stone cutting-off machines for job site - Safety
UNE 16534-1:2008 UNE
Status: Vigente/ 2008-09-17
Hacksaw blades. Part 1: Hand blades. Dimensions.
UNE 16534-2:1998 UNE
Status: Vigente/ 2007-12-01
HAND AND MACHINE HACKSAW BLADES. PART 2: MACHINE HACKSAW BLADES. PRINCIPALS DIMENSIONS.
ISO 2296:2018 ISO
Status: Published/ 2018-09-24
Metal slitting saws with fine and coarse teeth — Metric series
ISO 2336-2:2006 ISO
Status: Published/ 2006-08-07
Hacksaw blades — Part 2: Dimensions for machine blades
ISO 4875-1:2006 ISO
Status: Published/ 2006-07-05
Metal-cutting band saw blades — Part 1: Vocabulary
ISO 4875-2:2006 ISO
Metal-cutting band saw blades — Part 2: Characteristics and dimensions
ISO 2336-1:1996 ISO
Status: Published/ 1996-04-18
Hacksaw blades — Part 1: Dimensions for hand blades
ISO 2924:1973 ISO
Status: Published/ 1973-12-01
Solid and segmental circular saws for cold cutting of metals — Interchangeability dimensions of the drive — Saw diameter range 224 to 2 240 mm
UNE-EN 12418:2001+A1:2009 UNE
Status: Anulada/ 2022-07-27
UNE-EN 12418:2001 UNE
Status: Anulada/ 2009-12-29
MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE. SAFETY.
UNE-EN 12418:2001 ERRATUM:2005 UNE
UNE 16534-1:1998 UNE
Status: Anulada/ 2008-09-17
HAND AND MACHINE HACKSAW BLADES. PART 1: HAND HACKSAW BLADES. MAIN DIMENSIONS.
UNE 41033:1954 UNE
Status: Anulada/ 2000-01-27
CURRENT SASH SAW FOR CARPENTERS. DIMENSIONS
UNE 41034:1954 UNE
BACKSAW FOR CARPENTERS. DIMENSIONS
UNE 41035:1954 UNE
KEYHOLE SAW FOR CARPENTER. DIMENSIONS
UNE 16534-1:1990 UNE
Status: Anulada/ 1998-04-30
HAND AND MACHINE HACKSAW BLADES. PART 1 . PRINCIPALS DIMENSIONS.
ISO 2296:2011 ISO
Status: Withdrawn/ 2011-09-26
ISO 2336-2:1996 ISO
Status: Withdrawn/ 1996-04-18
ISO 2336:1980 ISO
Status: Withdrawn/ 1980-12-01
Hand and machine hacksaw blades — Dimensions for lengths up to 450 mm and pitches up to 6,3 mm
ISO 4875-2:1978 ISO
Status: Withdrawn/ 1978-11-01
Metal cutting band saw blades — Part 2: Basic dimensions and tolerances
ISO 4875-3:1978 ISO
Metal cutting band saw blades — Part 3: Characteristics relating to each type of blade
ISO 4875-1:1978 ISO
Status: Withdrawn/ 1978-05-01
Metal cutting band saw blades — Part 1: Definitions and terminology
ISO 2296:1972 ISO
Status: Withdrawn/ 1972-07-01
