Clear filters Apply
Results for:
Number of results 165
UNE 16150:1985 UNE
Status: Vigente/ 2025-06-25
JIG BUSHES. DEFINITIONS AND NOMENCLATURE.
UNE-ISO 702-1:2011 UNE
Status: Vigente/ 2025-06-05
Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 1: Conical connection
UNE-ISO 3442-2:2013 UNE
Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 2: Power-operated chucks with tongue and groove type jaws
UNE-ISO 3442-1:2013 UNE
Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 1: Manually operated chucks with tongue and groove type jaws
UNE-ISO 3089:2013 UNE
Status: Vigente/ 2025-03-12
Machine tools -- Test conditions for self-centring, manually operated chucks with one-piece jaws
UNE 15218:1992 UNE
Status: Current/2023-01-12
MACHINE TOOL TABLES. T-SLOTS AND CORRESPONDING BOLTS.
UNE-ISO 702-4:2008 UNE
Status: Vigente/ 2021-10-04
Machine tools. Connecting dimensions of spindle noses and work holding chucks- Part 4: cilindrical connection.
UNE-ISO 702-2:2011 UNE
Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 2: Camlock type
UNE-ISO 702-3:2011 UNE
Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 3: Bayonet type
UNE-ISO 3442-3:2013 UNE
Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 3: Power-operated chucks with serrated jaws
UNE 15433:1992 UNE
Status: Current/2021-09-07
ACCEPTANCE CONDITIONS OF MECHANICAL DIVIDING HEAD FOR MACHINE TOOLS. TESTING OF ACCURACY.
UNE-EN 1550:1998+A1:2008 UNE
Status: Vigente/ 2020-01-02
Machine-tools safety - Safety requirements for the design and construction of work holding chucks
UNE 15007:1994 UNE
Status: Vigente/ 1994-03-23
MACHINE TOOLS. SELF-HOLDING TAPERS FOR TOOL SHANKS.
UNE 15003:1994 UNE
Status: Vigente/ 1994-01-19
MACHINE TOOLS. MORSE TAPER SHANKS. COTTER SLOTS WITH TAPER KEYS.
UNE 15009-1:1994 UNE
TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS. PART 1: SHANKS NOS. 40, 45 AND 50. DIMENSIONS AND CONICITY TOLERANCES.
UNE 15009-2:1994 UNE
TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS. PART 2: RETENTION KNOBS FOR SHANKS NOS. 40, 45 AND 50. DIMENSIONS AND MECHANICAL CHARACTERISTICS.
UNE 15002:1994 UNE
Status: Vigente/ 1994-07-06
7/24 TAPERS FOR TOOL SHANKS FOR AUTOMATIC CHANGING. TAPERS FOR SPINDLE NOSES.
UNE 15008:1994 UNE
7/24 TAPERS FOR TOOL SHANKS FOR MANUAL CHANGING.
UNE 16009:1985 UNE
Status: Vigente/ 1985-04-15
MILLING MACHINE ARBORS WITH 7/24 TAPERS.
UNE 16133:1985 UNE
Status: Vigente/ 1985-03-15
EXTENSION SOCKETS FOR TOOLS WITH MORSE TIPERS SHANKS
UNE 16007:1985 UNE
MORSE TAPER WITH TREADED HOLE AND DRIVING PLANES.
UNE 16221:1985 UNE
CUTTERS ARBORS WITH TENON DRIVE. DIMENSIONS.
UNE 16222:1985 UNE
UNE 16132:1985 UNE
Status: Vigente/ 1985-01-15
REDUNTION SLEEVES FOR TOOLS WITH MORSE TAPER SHANKS.
UNE 16010:1985 UNE
SOCKETS AND NUTS FOR MILLING MACHINE ARBORS.
UNE 16151:1982 UNE
Status: Vigente/ 1982-09-15
JIG BUSHES AND ACCESORIES FOR DRILLING PURPOSES. DIMENSIONS.
UNE 16166:1982 UNE
PULLING TONQUES FOR CYLINDRIC HOLDERS OF TOOLS.
ISO 12164-5:2023 ISO
Status: Published/ 2023-10-20
Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES
ISO 12164-3:2023 ISO
Hollow taper interface with flange contact surface — Part 3: Shanks of types T, TA and U
ISO 12164-6:2023 ISO
Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES
ISO 12164-4:2023 ISO
Hollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U
ISO 12164-1:2023 ISO
Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB
ISO 12164-2:2023 ISO
Hollow taper interface with flange contact surface — Part 2: Receivers of types A, C and E for hollow taper shanks of types A, AB, C, CB and EB
ISO 22402-2:2022 ISO
Status: Published/ 2022-02-07
Medium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 series
ISO 22402-1:2021 ISO
Status: Published/ 2021-11-15
Medium-transfer units for tool interfaces — Part 1: Transfer units for hollow taper shanks in accordance with the ISO 12164 series
ISO 26623-1:2020 ISO
Status: Published/ 2020-11-24
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
ISO 26622-1:2017 ISO
Status: Published/ 2017-04-27
Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks
ISO 238:2016 ISO
Status: Published/ 2016-11-14
Reduction sleeves and extension sockets for tools with Morse taper shanks
ISO 4202:2016 ISO
Status: Published/ 2016-10-24
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
ISO 4207:2016 ISO
Counterbores with Morse taper shanks and detachable pilots
ISO 10897:2016 ISO
Status: Published/ 2016-08-24
Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts
ISO 10889-3:2016 ISO
Status: Published/ 2016-03-10
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
ISO 10889-4:2016 ISO
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
ISO 10889-6:2016 ISO
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
ISO 10889-7:2016 ISO
Tool holders with cylindrical shank — Part 7: Type F with taper seat
ISO 10889-5:2016 ISO
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
ISO 10889-2:2016 ISO
Status: Published/ 2016-03-09
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
ISO 7388-3:2016 ISO
Status: Published/ 2016-01-28
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF
ISO 26623-2:2014 ISO
Status: Published/ 2014-08-19
Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
ISO 10649-1:2013 ISO
Status: Published/ 2013-11-04
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
