Clear filters Apply
Results for:
Number of results 400
UNE-EN 12007-5:2025 UNE
Status: Vigente/ 2025-07-23
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements
UNE-EN 1594:2024 UNE
Status: Vigente/ 2024-10-16
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
UNE-CEN/TS 1453-2:2017 UNE
Status: Vigente/ 2024-10-04
Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
UNE-CEN/TS 12200-2:2017 UNE
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in April of 2017.)
UNE-CEN/TS 1519-2:2020 UNE
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-CEN/TS 17152-4:2024 UNE
Status: Vigente/ 2024-10-01
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 4: Guidance for structural design of modular systems (Endorsed by Asociación Española de Normalización in October of 2024.)
UNE-EN 12201-5:2024 UNE
Status: Vigente/ 2024-09-18
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
UNE-EN 12201-1:2024 V2 UNE
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 1: General
UNE-EN 13480-6:2024 UNE
Status: Vigente/ 2024-09-01
Metallic industrial piping - Part 6: Additional requirements for buried piping (Endorsed by Asociación Española de Normalización in September of 2024.)
UNE-EN 13480-8:2024 UNE
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2024.)
UNE-EN 13480-4:2024 UNE
Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in September of 2024.)
UNE-EN 13480-2:2024 UNE
Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2024.)
UNE-EN 13480-3:2024 UNE
Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in September of 2024.)
UNE-EN 13480-5:2024 UNE
Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in September of 2024.)
UNE-EN 15001-2:2024 UNE
Status: Vigente/ 2024-03-27
Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
UNE-CEN/TS 17152-3:2022/AC:2024 UNE
Status: Vigente/ 2024-03-01
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Assessment of conformity (Endorsed by Asociación Española de Normalización in March of 2024.)
UNE-EN 15001-1:2023 UNE
Status: Vigente/ 2023-12-27
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
UNE-EN 1455-1:2023 UNE
Status: Vigente/ 2023-12-20
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
UNE-EN 1566-1:2023 UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
UNE-CEN/TS 1455-2:2023 UNE
Status: Vigente/ 2023-12-01
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity (Endorsed by Asociación Española de Normalización in December of 2023.)
UNE-EN 14758-1:2023 UNE
Status: Vigente/ 2023-11-22
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
UNE-EN 13052-1:2002 UNE
Status: Vigente/ 2023-06-21
Influence of materials on water intended for human consumption - Organic materials - Determination of colour and turbidity of water in piping systems - Part 1: Test method.
UNE-EN 17649:2023 UNE
Status: Vigente/ 2023-01-18
Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements
UNE-CEN/TS 17152-3:2022 UNE
Status: Vigente/ 2023-01-01
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Conformity assessment scheme (Endorsed by Asociación Española de Normalización in January of 2023.)
UNE-EN 17613:2022 UNE
Status: Vigente/ 2022-12-07
LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
UNE-EN 1453-1:2017 UNE
Status: Vigente/ 2022-10-26
Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system. (Consolidated version)
UNE-EN 1451-1:2018 UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system. (Consolidated version)
UNE-EN 1519-1:2021 UNE
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system
UNE-EN ISO 11295:2022 UNE
Status: Vigente/ 2022-10-11
Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2022)
UNE-EN ISO 21003-3:2009/A1:2022 UNE
Status: Vigente/ 2022-09-28
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
UNE-EN ISO 22391-3:2010/A2:2022 UNE
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
UNE 53929:2022 UNE
Status: Vigente/ 2022-07-20
Plastics. Rehabilitation of supply and sewerage pipes with continuous cured tubes in situ (CIPP). Design, calculation and installation
UNE-EN 15632-2:2022 UNE
Status: Vigente/ 2022-06-01
District heating pipes - Factory made flexible pipe systems - Part 2: Bonded system with plastic service pipes; requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
UNE-EN 15632-3:2022 UNE
District heating pipes - Factory made flexible pipe systems - Part 3: Non bonded system with plastic service pipes; requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
UNE-EN 13476-3:2019+A1:2022 UNE
Status: Vigente/ 2022-05-25
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
UNE-EN 13476-2:2019+A1:2022 UNE
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
UNE-EN 1555-5:2022 UNE
Status: Vigente/ 2022-05-11
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
UNE-EN 1555-1:2022 UNE
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
UNE-CEN/TS 1555-7:2021 UNE
Status: Vigente/ 2022-04-01
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in April of 2022.)
UNE-EN ISO 22391-2:2010/A1:2021 UNE
Status: Vigente/ 2021-09-29
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
UNE-EN ISO 22391-3:2010/A1:2021 UNE
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
UNE-EN ISO 15494:2019/A1:2021 UNE
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 (ISO 15494:2015/Amd 1:2020)
UNE-EN ISO 15875-5:2004/A1:2021 UNE
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
UNE-EN ISO 15877-5:2009/A2:2021 UNE
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
UNE-EN ISO 22391-5:2010/A1:2021 UNE
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
UNE-CEN/TS 1046:2021 UNE
Status: Vigente/ 2021-09-01
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation (Endorsed by Asociación Española de Normalización in September of 2021.)
UNE-CEN/TS 12007-6:2021 UNE
Status: Vigente/ 2021-05-01
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 6: Specific functional recommendations for unplasticized polyamide (PA-U) (Endorsed by Asociación Española de Normalización in May of 2021.)
UNE-EN 1295-1:2021 UNE
Status: Vigente/ 2021-03-10
Structural design of buried pipelines under various conditions of loading - Part 1: General requirements
UNE 60302:2015 UNE
Status: Vigente/ 2021-02-02
Pipelines for gaseous fuels. Emplacement.
UNE-EN 12100:1998 UNE
Status: Vigente/ 2021-01-01
Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
