Skip main navigation
Committee

Committee:

CTN 60 - Gaseous fuels and gas and installations apparatus

Secretary:
SEDIGAS - ASOCIACIÓN ESPAÑOLA DEL GAS
Field of Activity:
Standardization of: - Gaseous fuels; - Supply and utilization gaseous fuels* installations and their associated components; - Gas apparatus; - Gas valves terminology, characteristics and test methods; - Gas filling stations; - Underground natural gas storage; - Personnel qualification that participates in the construction, operation, maintenance and inspection of gas supply installation and gas utilization installations. *NOTE: Gaseous fuels considered are the one specified by the UNE-EN 437 "Test gases - Test pressures - Appliance categories". Excluding: - Gas fired boilers; - Supply ducts; - Terminology, characteristics and test methods of liquid petroleum gases (LPG); - Valves under the scope of other technical committees; - Design and construction of equipment intended to be used for handling and storing of gaseous fuels under the scope of other technical committees; - Qualification of metallic material welders participating in the gas piping construction under the scope of Technical Committee CTN 14
Structure:

SC 1 Installations and equipments for gas installations

SC 2 Gas supply

SC 3 Gas utilization

SC 4 Installations and equipment for lpg

SC 5 Otras instalaciones y equipameinto

GT 2 Tuberías flexibles y mangueras para el trasvase o distribución de gas natural o glp en fase líquida o gaseosa

International Relations:

ISO/TC 28/SC 4  Classifications and specifications

ISO/TC 28/SC 5  Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels

ISO/TC 161  Controls and protective devices for gaseous and liquid fuels

ISO/TC 193  Natural gas

ISO/TC 255  Biogas

ISO/TC 291  Domestic gas cooking appliances

ISO/TC 340  Natural gas fuelling stations

CEN/COG Gas Utilization  Gas Utilization

CEN/SS B25  Building and construction - Gas distribution installation and related equipment

CEN/SS H25  Large gas appliances

CEN/SS N21  Gaseous fuels and combustible gas

CEN/SS S12  Gas analysis

CEN/TC 48  Domestic gas-fired water heaters

CEN/TC 49  Gas cooking appliances

CEN/TC 58  Safety and control devices for burners and appliances burning gaseous or liquid fuels

CEN/TC 62  Independent gas-fired space heaters

CEN/TC 106  Large kitchen appliances using gaseous fuels

CEN/TC 131  Forced draught burners for gaseous and liquid fuels

CEN/TC 180  Decentralized gas heating

CEN/TC 181  Appliances and leisure vehicle installations using liquefied petroleum gas and appliances using natural gas for outdoor use

CEN/TC 234  Gas infrastructure

CEN/TC 235  Gas pressure regulators and associated safety devices for use in gas transmission and distribution

CEN/TC 236  Non industrial manually operated shut-off valves for gas and particular combinations valves-other products

CEN/TC 237  Gas meters

CEN/TC 238  Test gases, test pressures, appliance categories and gas appliance types

CEN/TC 282  Installation and equipment for LNG

CEN/TC 299  Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fired washing and drying appliances.

CEN/TC 326  Natural Gas Vehicles - Fuelling and Operation

CEN/TC 408  Biomethane and other renewable and low-carbon methane rich gases

CEN/WS INNOMEM  Characterization and testing of membranes for gas separation applications

Standards developed by the committee: CTN 60: 947

UNE 60402-2:2019/1M:2021

Status: VIGENTE2025-02-06

Pressure regulators for gas receiving installations with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,15 bar. Part 2: Regulators for the second family gases, with an inlet MOP between 150 and 400 mbar and an outlet MOP up to 0,15 bar, with a low pressure cut-off safety valve, a high pressure cut-off safety valve and a relief valve for excess outlet pressure and with an equivalent flow rate up to 4,8 m3 (n)/h of air.

UNE 60718:2017/1M:2018

Status: VIGENTE2025-01-27

Hand operated metallic ball valves, with or without flow and/or temperature limiter, for installations using gaseous fuels with a maximum operation pressure (MOP) up to 0,5 MPa (5 bar). Dimensions and locking systems.

UNE 60718:2017

Status: VIGENTE2025-01-27

Hand operated metallic ball valves, with or without flow and/or temperature limiter, for installations using gaseous fuels with a maximum operation pressure (MOP) up to 0,5 MPa (5 bar). Dimensions and locking systems.

UNE 60718:2017/2M:2019

Status: VIGENTE2025-01-27

Hand operated metallic ball valves, with or without flow and/or temperature limiter, for installations using gaseous fuels with a maximum operation pressure (MOP) up to 0,5 MPa (5 bar). Dimensions and locking systems.

UNE 60210:2018

Status: VIGENTE2025-01-27

Liquefied natural gas (LNG) satellite terminals.

UNE 60411:2019

Status: VIGENTE2025-01-27

Pressure regulators for gas receiving installations with a maximum inlet operating pressure (MOPe) greater than 0,4 bar and up to 5 bar and a maximum outlet operating pressure (MOPs) up to 0,4 bar.

UNE 60402-1:2019

Status: VIGENTE2025-01-27

Pressure regulators for gas receiving installations with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,15 bar. Part 1: Regulators with an outlet MOP up to 0,10 bar with or without a low pressure cut-off safety valve with an equivalent flow rate up to 4,8 m3 (n)/h of air

UNE 60402-2:2019

Status: VIGENTE2025-01-27

Pressure regulators for gas receiving installations with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,15 bar. Part 2: Regulators for the second family gases, with an inlet MOP between 150 and 400 mbar and an outlet MOP up to 0,15 bar, with a low pressure cut-off safety valve, a high pressure cut-off safety valve and a relief valve for excess outlet pressure and with an equivalent flow rate up to 4,8 m3 (n)/h of air.

UNE-EN 12309-3:2025

Status: VIGENTE2025-01-15

Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 3: Requirements, test conditions and test methods

UNE-EN 17963:2025

Status: VIGENTE2025-01-08

Natural gas vehicles - LNG vehicle fuelling procedures

UNE 60670-6:2023/1M:2024

Status: VIGENTE2024-12-26

Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 6: Configuration, ventilation and evacuation of the combustion products requirements for the premises for gas appliances.

UNE-EN 17932:2024

Status: VIGENTE2024-12-26

Natural gas vehicles - Requirements for liquefied natural gas vehicle (LNGV) workshops and the management of liquefied natural gas (LNG) vehicles

UNE-EN 1266:2003

Status: VIGENTE2024-12-11

Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases

UNE-EN 16314:2014

Status: VIGENTE2024-12-11

Gas meters - Additional functionalities

UNE-EN 14438:2007

Status: VIGENTE2024-12-11

Gas-fired insets for heating more than one room

UNE-EN 30-1-2:2024+A1:2024

Status: VIGENTE2024-12-04

Domestic cooking appliances burning gas - Part 1-2: Safety - Appliances having forced-convection ovens

UNE-EN 12261:2024

Status: VIGENTE2024-11-27

Gas meters - Turbine gas meters

UNE-EN 1854:2023+A1:2024

Status: VIGENTE2024-11-13

Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Pressure sensing devices for gas burners and gas burning appliances

UNE-EN 16898:2023+A1:2024

Status: VIGENTE2024-11-13

Safety and control devices for gas burners and gas burning appliances - Gas filters having a maximum working pressure up to and including 600 kPa

UNE-EN 203-1:2022+A1:2024

Status: VIGENTE2024-11-06

Gas heated catering equipment - Part 1: General safety requirements