Committee

Committee:

CTN 53/SC 2 - Plastic pipes and fittings

Secretary:
ANAIP - ASOCIACIÓN ESPAÑOLA DE INDUSTRIALES DE PLÁSTICOS
International Relations:

ISO/TC 138  Plastics pipes, fittings and valves for the transport of fluids

CEN/TC 155  Plastics piping systems and ducting systems

CEN/TC 164  Water supply

* Some activities of this TC correspond to other AEN/CTN.

Standards developed by the committee: CTN 53/SC 2: 661

UNE-CEN/TS 1452-7:2014 (Ratificada)

Status: VIGENTE /  2025-05-08

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity (Endorsed by AENOR in May of 2014.)

UNE-EN 17150:2020

Status: VIGENTE /  2025-05-08

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of short-term compression strength of boxes

UNE-EN 17176-5:2019

Status: VIGENTE /  2025-05-08

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system

UNE-EN 17176-1:2019

Status: VIGENTE /  2025-05-08

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General

UNE-EN 17176-2:2019+A1:2023

Status: VIGENTE /  2025-05-08

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes

UNE-EN 1704:1997

Status: VIGENTE /  2025-05-08

Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending

UNE-EN 917:1997

Status: VIGENTE /  2025-05-08

Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness

UNE-CEN/TS 18116:2024 (Ratificada)

Status: VIGENTE /  2025-02-01

Thermoplastics pipes and fittings - Design for recycling guidelines (Endorsed by Asociación Española de Normalización in February of 2025.)

UNE-EN 12201-3:2024/AC:2025

Status: VIGENTE /  2025-01-22

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings

UNE 53331:2024

Status: VIGENTE /  2024-12-18

Plastics. Unplastized poly(vinyl chloride), oriented unplasticized poly(vinyl chloride) (PVC-O), polyethylene (PE) and polypropylene (PP) pipes. Criterion for the assessment of pipes for plastics piping systems with car without pressure under external loads.

UNE-EN ISO 8233:2024

Status: VIGENTE /  2024-10-30

Thermoplastics valves - Torque - Test method (ISO 8233:2024)

UNE-CEN/TS 1453-2:2017

Status: VIGENTE /  2024-10-04

Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity

UNE-CEN/TS 12200-2:2017 (Ratificada)

Status: VIGENTE /  2024-10-04

Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in April of 2017.)

UNE-CEN/TS 1519-2:2020 (Ratificada)

Status: VIGENTE /  2024-10-04

Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)

UNE 53394:2018 IN

Status: VIGENTE /  2024-10-02

Plastics. Code for the installation and handling of polyethylene (PE) pipes for water piping under pressure. Recommended techniques

UNE 53367-1:2014/1M:2018

Status: VIGENTE /  2024-10-02

Plastics. Plastics piping systems for water supply for irrigation. Part 1: Specifications for polyethylene pipes

UNE 53367-1:2014

Status: VIGENTE /  2024-10-02

Plastics. Plastics piping systems for water supply for irrigation. Part 1: Specifications for polyethylene pipes

UNE-EN 12201-1:2024 V2

Status: VIGENTE /  2024-09-18

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 1: General

UNE-EN 12201-2:2024

Status: VIGENTE /  2024-09-18

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes

UNE-EN 12201-3:2024

Status: VIGENTE /  2024-09-18

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings

Back to results New Search

AENORmás

Design your own personalised collection of standards. Keep your standards updated.