Committee

Committee:

CTN 203/SC 91-119 - Electronics assembly technology and printed electronics

Secretary:
SERCOBE - ASOCIACIÓN NACIONAL DE FABRICANTES DE BIENES DE EQUIPO
International Relations:

IEC/TC 91  Electronics assembly technology

IEC/TC 119  Printed Electronics

CLC/SR 91  Electronics assembly technology

CLC/SR 119  Printed electronics

Standards developed by the committee: CTN 203/SC 91-119: 311

UNE-EN 61249-2-26:2005 (Ratificada)

Status: VIGENTE /  2005-07-01

Materials for printed boards and other interconnecting structures -- Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (Endorsed by AENOR in July of 2005.)

UNE-EN 61249-2-10:2004

Status: VIGENTE /  2004-06-11

Materials for printed boards and other interconnecting structures -- Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad

UNE-EN 61249-2-8:2004

Status: VIGENTE /  2004-06-11

Materials for printed boards and other interconnecting structures -- Part 2-8: Reinforced base materials clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad

UNE-EN 61249-2-9:2004

Status: VIGENTE /  2004-06-11

Materials for printed boards and other interconnecting structures -- Part 2-9: Reinforced base materials clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad

UNE-EN 62326-1:2004

Status: VIGENTE /  2004-02-27

Printed boards -- Part 1: Generic specification

UNE-EN 61188-5-2:2003 (Ratificada)

Status: VIGENTE /  2004-01-01

Printed boards and printed board assemblies - Design and use -- Part 5-2: Attachment (land/joint) considerations - Discrete components (Endorsed by AENOR in January of 2004.)

UNE-EN 61188-5-6:2003 (Ratificada)

Status: VIGENTE /  2003-07-01

Printed boards and printed board assemblies - Design and use -- Part 5-6: Attachment (land/joint) considerations - Chip carriers with J-leads on four sides (Endorsed by AENOR in July of 2003.)

UNE-EN 61249-2-18:2003

Status: VIGENTE /  2003-03-28

Materials for printed boards and other interconnecting structures -- Part 2-18: Reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper-clad.

UNE-EN 61249-2-19:2003

Status: VIGENTE /  2003-03-28

Materials for printed boards and other interconnecting structures -- Part 2-19: Reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad.

UNE-EN 61249-2-4:2003

Status: VIGENTE /  2003-03-28

Materials for printed boards and other interconnecting structures -- Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad.

UNE-EN 61190-1-1:2002 (Ratificada)

Status: VIGENTE /  2002-11-01

Attachment materials for electronic assembly -- Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly (Endorsed by AENOR in November of 2002.)

UNE-EN 61249-2-7:2002 (Ratificada)

Status: VIGENTE /  2002-11-01

Materials for printed boards and other interconnecting structures -- Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad (Endorsed by AENOR in November of 2002.)

UNE-EN 61193-1:2002 (Ratificada)

Status: VIGENTE /  2002-07-01

Quality assessment systems -- Part 1: Registration and analysis of defects on printed board assemblies (Endorsed by AENOR in July of 2002.)

UNE-EN 61189-1:1997/A1:2001 (Ratificada)

Status: VIGENTE /  2002-03-01

Test methods for electrical materials, interconnection structures and assemblies -- Part 1: General test methods and methodology. (Endorsed by AENOR in March of 2002.)

UNE-EN 60249-2-11/A4:2001

Status: VIGENTE /  2001-12-31

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 11: Thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boards.

UNE-EN 60249-2-12/A4:2001

Status: VIGENTE /  2001-12-31

Base materials for printed circuits -- Part 2-12: Specifications: thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards.

UNE-EN 60249-2-14/A5:2001

Status: VIGENTE /  2001-12-31

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 14: Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality

UNE-EN 60249-2-16/A3:2001

Status: VIGENTE /  2001-12-31

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 16: Polyimide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test).

UNE-EN 60249-2-17/A3:2001

Status: VIGENTE /  2001-12-31

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 17: Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards.

UNE-EN 60249-2-18/A3:2001

Status: VIGENTE /  2001-12-31

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 18: Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test).

Back to results New Search

AENORmás

Design your own personalised collection of standards. Keep your standards updated.