Committee

Committee:

CTN 203/SC 91-119 - Electronics assembly technology and printed electronics

Secretary:
SERCOBE - ASOCIACIÓN NACIONAL DE FABRICANTES DE BIENES DE EQUIPO
International Relations:

IEC/TC 91  Electronics assembly technology

IEC/TC 119  Printed Electronics

CLC/SR 91  Electronics assembly technology

CLC/SR 119  Printed electronics

Standards developed by the committee: CTN 203/SC 91-119: 311

UNE-EN 61249-2-42:2010 (Ratificada)

Status: VIGENTE /  2010-09-01

Materials for printed boards and other interconnecting structures -- Part 2-42: Reinforced base materials clad and unclad - Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly (Endorsed by AENOR in September of 2010.)

UNE-EN 61191-6:2010 (Ratificada)

Status: VIGENTE /  2010-08-01

Printed board assemblies -- Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement method (Endorsed by AENOR in August of 2010.)

UNE-EN 61249-4-14:2009 (Ratificada)

Status: VIGENTE /  2009-12-01

Materials for printed boards and other interconnecting structures -- Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly (Endorsed by AENOR in December of 2009.)

UNE-EN 61249-4-15:2009 (Ratificada)

Status: VIGENTE /  2009-12-01

Materials for printed boards and other interconnecting structures -- Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly (Endorsed by AENOR in December of 2009.)

UNE-EN 61249-4-16:2009 (Ratificada)

Status: VIGENTE /  2009-12-01

Materials for printed boards and other interconnecting structures -- Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly (Endorsed by AENOR in December of 2009.)

UNE-EN 61249-4-17:2009 (Ratificada)

Status: VIGENTE /  2009-12-01

Materials for printed boards and other interconnecting structures -- Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly (Endorsed by AENOR in December of 2009.)

UNE-EN 62137-1-5:2009 (Ratificada)

Status: VIGENTE /  2009-08-01

Surface mounting technology - Environmental and endurance test methods for surface mount solder joints -- Part 1-5: Mechanical shear fatigue test (Endorsed by AENOR in August of 2009.)

UNE-EN 61249-2-35:2009 (Ratificada)

Status: VIGENTE /  2009-06-01

Materials for printed boards and other interconnecting structures -- Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly (Endorsed by AENOR in June of 2009.)

UNE-EN 61249-2-36:2009 (Ratificada)

Status: VIGENTE /  2009-06-01

Materials for printed boards and other interconnecting structures -- Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly (Endorsed by AENOR in June of 2009.)

UNE-EN 61249-2-37:2009 (Ratificada)

Status: VIGENTE /  2009-06-01

Materials for printed boards and other interconnecting structures -- Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly (Endorsed by AENOR in June of 2009.)

UNE-EN 61249-2-38:2009 (Ratificada)

Status: VIGENTE /  2009-06-01

Materials for printed boards and other interconnecting structures -- Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly (Endorsed by AENOR in June of 2009.)

UNE-EN 62137-1-3:2009 (Ratificada)

Status: VIGENTE /  2009-05-01

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-3: Cyclic drop test (Endorsed by AENOR in May of 2009.)

UNE-EN 62137-1-4:2009 (Ratificada)

Status: VIGENTE /  2009-05-01

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-4: Cyclic bending test (Endorsed by AENOR in May of 2009.)

UNE-EN 61249-4-1:2008 (Ratificada)

Status: VIGENTE /  2008-09-01

Materials for interconnecting structures -- Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability. (Endorsed by AENOR in September of 2008.)

UNE-EN 61188-5-8:2008 (Ratificada)

Status: VIGENTE /  2008-07-01

Printed boards and printed board assemblies - Design and use - Part 5-8: Attachment (land/joint) considerations - Area array components (BGA, FBGA, CGA, LGA) (Endorsed by AENOR in July of 2008.)

UNE-EN 61189-3:2008 (Ratificada)

Status: VIGENTE /  2008-05-01

Test methods for electrical materials, printed boards and other interconnection structures and assemblies -- Part 3: Test methods for interconnection structures (printed boards) (Endorsed by AENOR in May of 2008.)

UNE-EN 61193-2:2007 (Ratificada)

Status: VIGENTE /  2008-03-01

Quality assessment systems -- Part 2: Selection and use of sampling plans for inspection of electronic components and packages (IEC 61193-2:2007). (Endorsed by AENOR in March of 2008.)

UNE-EN 61188-5-3:2007 (Ratificada)

Status: VIGENTE /  2008-03-01

Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides (Endorsed by AENOR in March of 2008.)

UNE-EN 61188-5-4:2007 (Ratificada)

Status: VIGENTE /  2008-03-01

Printed boards and printed board assemblies - Design and use - Part 5-4: Attachment (land/joint) considerations - Components with J leads on two sides (Endorsed by AENOR in March of 2008.)

UNE-EN 61188-5-5:2007 (Ratificada)

Status: VIGENTE /  2008-03-01

Printed boards and printed board assemblies - Design and use - Part 5-5: Attachment (land/joint) considerations - Components with gull-wing leads on four sides (Endorsed by AENOR in March of 2008.)

Back to results New Search

AENORmás

Design your own personalised collection of standards. Keep your standards updated.