Committee

Committee:

CTN 203/SC 2 - Rotating machinery

Secretary:
AFBEL - ASOCIACIÓN DE FABRICANTES DE BIENES DE EQUIPO ELÉCTRICOS
International Relations:

IEC/TC 2  Rotating machinery

CLC/TC 2  Rotating machinery

Standards developed by the committee: CTN 203/SC 2: 147

UNE-CLC IEC/TS 60034-32:2021 (Ratificada)

Status: VIGENTE /  2021-11-01

Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings (Endorsed by Asociación Española de Normalización in November of 2021.)

UNE-EN IEC 60773:2021 (Ratificada)

Status: VIGENTE /  2021-07-01

Rotating electrical machines - Test methods and apparatus for the measurement of the operational characteristics of brushes (Endorsed by Asociación Española de Normalización in July of 2021.)

UNE-EN 60034-18-41:2014/A1:2019/AC:2020-12 (Ratificada)

Status: VIGENTE /  2021-02-01

Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests (Endorsed by Asociación Española de Normalización in February of 2021.)

UNE-EN 60034-18-42:2017/A1:2020 (Ratificada)

Status: VIGENTE /  2020-11-01

Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests (Endorsed by Asociación Española de Normalización in November of 2020.)

UNE-EN IEC 60034-3:2020 (Ratificada)

Status: VIGENTE /  2020-09-01

Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators (Endorsed by Asociación Española de Normalización in September of 2020.)

UNE-EN IEC 60034-5:2020 (Ratificada)

Status: VIGENTE /  2020-07-01

Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification (Endorsed by Asociación Española de Normalización in July of 2020.)

UNE-EN IEC 60034-2-3:2020 (Ratificada)

Status: VIGENTE /  2020-06-01

Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors (Endorsed by Asociación Española de Normalización in June of 2020.)

UNE-EN IEC 60276:2019 (Ratificada)

Status: VIGENTE /  2019-11-01

Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature (Endorsed by Asociación Española de Normalización in November of 2019.)

UNE-EN 60034-18-41:2014/A1:2019 (Ratificada)

Status: VIGENTE /  2019-11-01

Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests (Endorsed by Asociación Española de Normalización in November of 2019.)

UNE-EN IEC 60034-23:2019 (Ratificada)

Status: VIGENTE /  2019-05-01

Rotating electrical machines - Part 23: Repair, overhaul and reclamation (Endorsed by Asociación Española de Normalización in May of 2019.)

UNE-EN IEC 60034-14:2018 (Ratificada)

Status: VIGENTE /  2018-12-01

Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity (Endorsed by Asociación Española de Normalización in December of 2018.)

UNE-EN IEC 60034-27-4:2018 (Ratificada)

Status: VIGENTE /  2018-11-01

Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines (Endorsed by Asociación Española de Normalización in August of 2018.)

UNE-EN IEC 60034-4-1:2018 (Ratificada)

Status: VIGENTE /  2018-10-01

Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests (Endorsed by Asociación Española de Normalización in October of 2018.)

UNE-EN IEC 60034-27-1:2018 (Ratificada)

Status: VIGENTE /  2018-08-01

Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation

UNE-EN 60034-12:2017 (Ratificada)

Status: VIGENTE /  2017-07-01

Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors (Endorsed by Asociación Española de Normalización in July of 2017.)

UNE-EN 60034-18-42:2017 (Ratificada)

Status: VIGENTE /  2017-07-01

Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests (Endorsed by Asociación Española de Normalización in July of 2017.)

UNE-EN 60034-27-3:2016 (Ratificada)

Status: VIGENTE /  2016-08-01

Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (Endorsed by AENOR in August of 2016.)

UNE-EN 60034-19:2015

Status: VIGENTE /  2015-04-01

Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies

UNE-EN 60034-2-1:2014 (Ratificada)

Status: VIGENTE /  2014-11-01

Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) (Endorsed by AENOR in November of 2014.)

UNE-EN 60034-8:2008/A1:2014

Status: VIGENTE /  2014-09-24

Rotating electrical machines - Part 8: Terminal markings and direction of rotation

Back to results New Search

AENORmás

Design your own personalised collection of standards. Keep your standards updated.