Committee:
SC 1 Cast iron pipes, fittings, accessories and flanges
SC 2 Sanitary tapware
SC 3 Valves
SC 4 Emergency shower devices
ISO/TC 5 Ferrous metal pipes and metallic fittings
ISO/TC 48/SC 9 Laboratory furniture
ISO/TC 153 Valves
CEN/TC 69 Industrial valves
CEN/TC 74 Flanges and their joints
CEN/TC 164 Water supply
CEN/TC 203 Cast iron pipes, fittings and their joints
CEN/TC 332 Laboratory equipment
* Some activities of this TC correspond to other AEN/CTN.
Standards developed by the committee: CTN 19: 457
Status: ANULADA / 2002-05-30
PLUG METALLIC COCKS OF TAPER TAP FOR GASEUS FUELS UNDER A NOMINAL PRESSING UP TO 0,2 KGF/CM2, HANDLED MANUALLY IN INTERNAL INSTALLATIONS. CONNECTION COUPLING WITH PLANE JOINT.
PLUG METALLIC COCKS OF TAPER TAP FOR GASEUS FUELS UNDER A NOMINAL PRESSING UP TO 0,2 KGF/CM2, HANDLED MANUALLY IN INTERNAL INSTALLATIONS CONNECTION SCREWS.
Status: ANULADA / 2001-09-06
CAST IRON PARTS. BENDS WITH TWO FLANGES (90º). NOMINAL PRESSURE 10. WORKING PRESSURE I-10 AND II-8.
CAST IRON PARTS. CORD AND FLANGE POINT (PIECE F). NOMINAL PRESSURE 10. WORKING PRESSURE I-10 AND II-8.
CAST IRONS PARTS. FLANGE AND STOCKED POINT (PIECE E). NOMINAL PRESSURE 10. WORKING PRESSURE I-10 AND II-8.
CAST IRON PARTS. T PIECES OF THE THREE SAME FLANGES. CROSS OF THE FOUR SAME FLANGES. NOMINAL PRESSURE 10. WORKING PRESSURE I-10 AND II-8.
SOCKET AND CABLE COUPLING.
FLANGES. HOLE ARRANGEMENT FOR THE SCREWS.
FLANGES. COUPLING DIMENSIONS FOR NOMINAL PRESSURES 25 AND 40. WOKING PRESSURES I-25, I-40, II-20, II-32, III-20 AND III-32.
FLANGES. COUPLING DIMENSIONS FOR NOMINAL PRESSURES 64 AND 100. WORKING PRESSURES I-64 UP TO I-100, II-50 UP TO II-80 AND III-40 UP TO III-64
PIPES. SYNOPTIQUE PICTURE.
PIPES. PITCH NOMINAL DIAMETERS.
TUBES. SYNOPTIQUE PICTURE.
CAST-IRON PIPE WITH FLANGE. NOMINAL PRESSURE 10. WORKING PRESSURE 1-10.
CASTING PIPES AND FITTINGS FOR WASTE WATER AND STORM WATER. PLUGLESS CONNECTION.
Status: ANULADA / 1999-03-11
WELDING FLANGES. NOMINAL PRESSURE 10. WORKING PRESSURES I-10 AND II-8. CONDUCTIONS.
Status: ANULADA / 1998-04-30
GENERAL REQUIREMENTS TO BE MET BY GASEUS FUEL KEYS, ACTUATING BY HAND TO SERVICE PRESSURE UP TO 5 KGF - CM2, INTO INSTALLATIONS.
PLUG METALLIC COCKS OF TAPER TAP FOR GASEUS FUELS UNDER A NOMINAL PRESSING UP TO 0,2 KGF/CM2, HANDLED MANUALLY IN INTERNAL INSTALLATIONS. TAP-SOCKET SQUARE COCK WITH PARALLEL SCREW THREAD WITH PLANE JOINT.
PLUG METALLIC COCKS OF TAPER TAP FOR GASEUS FUELS UNDER A NOMINAL PRESSING UP TO 0,2 KGF/CM2, HANDLED MANUALLY IN INTERNAL INSTALLATIONS. TAP-OLIVE SQUARE COCK WITH CONNECTION BY PLANE JOINT.
PLUG METALLIC COCKS OF TAPER TAP FOR GASEUS FUELS UNDER A NOMINAL PRESSING UP TO 0,2 KGF/CM2, HANDLED MANUALLY IN INTERNAL INSTALLATIONS. TAP-SOCKET FEET COCK WITH CONNECTION BY PLANE JOINT.
Back to results New Search
Design your own personalised collection of standards. Keep your standards updated.
