Committee

Committee:

CTN 17 - Fasteners

Secretary:
ASEFI - ASOCIACIÓN DE FABRICANTES DE ELEMENTOS DE FIJACIÓN METÁLICOS
Field of Activity:
Standardization of: - Dimensions, tolerances, mechanical and operational properties, test methods and acceptance procedures of metallic fasteners, considering a fastener as any kind of product intended to mechanically join two or more structural items to perform a fixed or mobile joint or to essentially contribute to perform it, as screws, bolts, studs, nuts, washers, nails, pins and rivets; - Series of interchangeable threads, including tolerances and verification, in each field of application, with a minimum sort of basic profiles, pitches and diameters. Excluding: - Fasteners for aerospatial applications; - Special purpose screws, keys and fasteners specially used in rolling bearings; - Pipe threads and aerospatial threads.
International Relations:

ISO/TC 1  Screw threads

ISO/TC 2  Fasteners

CEN/TC 185  Fasteners

Standards developed by the committee: CTN 17: 507

UNE-EN ISO 3506-3:1998

Status: ANULADA /  2010-12-15

MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS. PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS. (ISO 3506-3:1997).

UNE-EN ISO 3506-4:2005

Status: ANULADA /  2010-12-15

Mechanical properties of corrosion resistant stainless steel fasteners. Part 4: Tapping screws (ISO 3506-4:2003)

UNE-EN ISO 3506-1:1998

Status: ANULADA /  2010-10-20

MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS. PART 1: BOLTS, SCREWS AND STUDS. (ISO 3506-1:1997).

UNE-EN ISO 13337:1998

Status: ANULADA /  2010-07-21

SPRING-TYPE STRAIGHT PINS. SLOTTED, LIGHT DUTY (ISO 13337:1997).

UNE-EN ISO 8752:1998

Status: ANULADA /  2010-07-21

SPRING-TYPE STRAIGHT PINS. SLOTTED, HEAVY DUTY. (ISO 8752:1997).

UNE-EN ISO 898-1:2000

Status: ANULADA /  2010-05-19

MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL. PART 1: BOLTS, SCREWS AND STUDS (ISO 898-1:1999).

UNE-EN ISO 10673:1999

Status: ANULADA /  2010-02-24

PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES. SMALL, NORMAL AND LARGE SERIES. PRODUCT GRADE A. (ISO 10673:1998).

UNE-EN ISO 10644:1999

Status: ANULADA /  2010-02-24

SCREW AND WASHER ASSEMLIES WITH PLAIN WASHERS. PART 1: WASHER HARDNESS CLASSES 200 HV AND 300 HV. (ISO 10644:1998).

UNE-EN ISO 2320:1998

Status: ANULADA /  2009-09-16

PREVAILING TORQUE TYPE STEEL HEXAGON NUTS. MECHANICAL AND PERFORMANCE REQUIREMENTS. (ISO 2320:1997).

UNE-EN 14399-1:2005 (Ratificada)

Status: ANULADA /  2009-05-27

High-strength structural bolting assemblies for preloading - Part 1: General requirements (Endorsed by AENOR in August of 2006.)

UNE-EN 14399-2:2005 (Ratificada)

Status: ANULADA /  2009-05-27

High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading (Endorsed by AENOR in August of 2006.)

UNE-EN 14399-3:2005 (Ratificada)

Status: ANULADA /  2009-05-27

High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies (Endorsed by AENOR in August of 2006.)

UNE-EN 14399-4:2005 (Ratificada)

Status: ANULADA /  2009-05-27

High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies (Endorsed by AENOR in August of 2006.)

UNE-EN 14399-5:2005 (Ratificada)

Status: ANULADA /  2009-05-27

High-strength structural bolting assemblies for preloading - Part 5: Plain washers (Endorsed by AENOR in August of 2006.)

UNE-EN 14399-6:2005 (Ratificada)

Status: ANULADA /  2009-05-27

High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers (Endorsed by AENOR in August of 2006.)

UNE-EN 14831:2005 (Ratificada)

Status: ANULADA /  2008-09-24

Fasteners - Tightening performance - Torque/Angle simplified test method (Endorsed by AENOR in August of 2006.)

UNE-EN ISO 7085:2000

Status: ANULADA /  2008-01-31

MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS (ISO 7085:1999)

UNE-EN ISO 15065:2005 (Ratificada)

Status: ANULADA /  2008-01-16

Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005) (Endorsed by AENOR in August of 2006.)

UNE-EN ISO 8751:1998

Status: ANULADA /  2008-01-16

SPRING-TYPE STRAIGHT PINS. COILED, LIGHT DUTY. (ISO 8751:1997).

UNE-EN ISO 8748:1998

Status: ANULADA /  2008-01-16

SPRING-TYPE STRAIGHT PINS. COILED, HEAVY DUTY. (ISO 8748:1997).

Back to results New Search

AENORmás

Design your own personalised collection of standards. Keep your standards updated.