Home>Encuentra tu norma>Comités Técnicos de Normalización>Comité
Committee

Committee:

CTN 17 - Fasteners

Secretary:
ASEFI - ASOCIACIÓN DE FABRICANTES DE ELEMENTOS DE FIJACIÓN METÁLICOS
Field of Activity:
Standardization of: - Dimensions, tolerances, mechanical and operational properties, test methods and acceptance procedures of metallic fasteners, considering a fastener as any kind of product intended to mechanically join two or more structural items to perform a fixed or mobile joint or to essentially contribute to perform it, as screws, bolts, studs, nuts, washers, nails, pins and rivets; - Series of interchangeable threads, including tolerances and verification, in each field of application, with a minimum sort of basic profiles, pitches and diameters. Excluding: - Fasteners for aerospatial applications; - Special purpose screws, keys and fasteners specially used in rolling bearings; - Pipe threads and aerospatial threads.
International Relations:

ISO/TC 1  Screw threads

ISO/TC 2  Fasteners

CEN/TC 185  Fasteners

Standards developed by the committee: CTN 17: 507

UNE-EN ISO 8742:1998

Status: VIGENTE / 2008-02-04

GROOVED PINS. ONE-THIRD-LENGTH CENTRE GROOVED. (ISO 8742:1997).

UNE-EN ISO 8743:1998

Status: VIGENTE / 2008-02-04

GROOVED PINS. HALF-LENGTH CENTRE GROOVED. (ISO 8743:1997).

UNE-EN ISO 8745:1998

Status: VIGENTE / 2008-02-04

Grooved pins - Half-length taper grooved (ISO 8745:1997)

UNE-EN ISO 8745:1998 ERRATUM

Status: VIGENTE / 2008-02-04

GROOVED PINS. HALF-LENGTH TAPER GROOVED. (ISO 8745:1997).

UNE-EN ISO 8744:1998

Status: VIGENTE / 2008-02-04

Grooved pins - Full-length taper grooved (ISO 8744:1997)

UNE-EN ISO 8741:1998

Status: VIGENTE / 2008-02-04

Grooved pins - Half-length reverse taper grooved (ISO 8741:1997)

UNE-EN ISO 8733:1998

Status: VIGENTE / 2008-02-04

PARALLEL PINS WITH INTERNAL THREAD, OF UNHARDENED STEEL OR AUSTENITIC STAINLESS STEEL. (ISO 8733:1997).

UNE-EN ISO 8735:1998

Status: VIGENTE / 2008-02-04

PARALLEL PINS WITH INTERNAL THREAD, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL. (ISO 8735:1997).

UNE-EN ISO 2338:1998

Status: VIGENTE / 2008-02-04

PARALLEL PINS, OF UNHARDENED STEEL AND AUSTENIC STAINLESS STEEL. (ISO 2338:1997).

UNE-EN ISO 2338:1998 ERRATUM

Status: VIGENTE / 2008-02-04

PARALLEL PINS, OF UNHARDENED STEEL AND AUSTENITIC STAINLESS STEEL. (ISO 2338:1997).

UNE-EN ISO 8734:1998

Status: VIGENTE / 2008-02-04

PARALLEL PINS, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL (DOWEL PINS). (ISO 8734:1997).

UNE-EN 28737:1993

Status: VIGENTE / 2008-02-04

TAPER PINS WITH EXTERNAL THREAD, UNHARDENED. (ISO 8737:1986).

UNE-EN 28736:1993

Status: VIGENTE / 2008-02-04

TAPER PINS WITH INTERNAL THREAD, UNHARDENED. (ISO 8736:1986).

UNE-EN 22339:1993

Status: VIGENTE / 2008-02-04

TAPER PINS, UNHARDENED. (ISO 2339:1986).

UNE-EN ISO 1234:1998

Status: VIGENTE / 2008-02-04

SPLIT PINS. (ISO 1234:1997).

UNE-EN ISO 15981:2003

Status: VIGENTE / 2008-02-04

Open end blind rivets with break pull mandrell and protruding head. AIA/AIA (ISO 15981:2002)

UNE-EN ISO 15977:2003

Status: VIGENTE / 2008-02-04

Open end blind rivets with break pull mandrel and protruding head. AIA/St (ISO 15977:2001)

UNE-EN ISO 15983:2003

Status: VIGENTE / 2008-02-04

Open end blind rivets with break pull mandrel and protruding head. A2/A2 (ISO 15983:2002)

UNE-EN ISO 16582:2003

Status: VIGENTE / 2008-02-04

Open end blind rivets with break pull mandrel and protruding head. Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)

UNE-EN ISO 16584:2003

Status: VIGENTE / 2008-02-04

Open end blind rivets with break pull mandrel and protruding head. NiCu/St or NiCu/SSt (ISO 16584:2002)

Back to results New Search

AENORmás

Design your own personalised collection of standards. Keep your standards updated.