Clear filters Apply
Results for:
Number of results 129
UNE-EN 17235:2025 UNE
Status: Vigente/ 2025-02-05
Permanent anchor devices and safety hooks
UNE-EN 772-9:1999 UNE
Status: Vigente/ 2025-01-23
Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
UNE-EN 846-2:2001 UNE
Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints.
UNE-EN 1052-4:2001 UNE
Methods of test for masonry - Part 4: Determination of shear strength including damp proof course.
UNE-EN 772-16:2011 UNE
Methods of test for masonry units - Part 16: Determination of dimensions
UNE-EN 772-18:2011 UNE
Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units
UNE-EN 772-11:2011 UNE
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
UNE-EN 846-5:2013 UNE
Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
UNE-EN 846-14:2013 UNE
Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
UNE-EN 846-6:2015 UNE
Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
UNE-EN 846-7:2015 UNE
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
UNE-EN 846-10:2001 UNE
Status: Vigente/ 2024-01-23
Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets.
UNE-EN 504:2000 UNE
Status: Vigente/ 2024-01-19
Roofing products from metal sheets. Specification for fully supported roofing products of copper sheet.
UNE-EN 506:2010 UNE
Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet
UNE-EN 14437:2023 UNE
Status: Vigente/ 2023-06-28
Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method
UNE-EN 772-13:2001 UNE
Status: Vigente/ 2023-01-01
Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone).
UNE-EN 846-3:2001 UNE
Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement.
UNE-EN 846-11:2001 UNE
Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels.
UNE-EN 846-8:2001 UNE
Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers.
UNE-EN 772-20:2001 UNE
Methods of test for masonry units - Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units.
UNE-EN 846-4:2002 UNE
Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps
UNE-EN 846-13:2002 UNE
Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings.
UNE-EN 13914-2:2019 UNE
Design, preparation and application of external rendering and internal plastering - Part 2: Internal plastering
UNE-EN 13914-1:2019 UNE
Design, preparation and application of external rendering and internal plastering - Part 1: External rendering
UNE-EN ISO 11432:2022 UNE
Status: Vigente/ 2022-05-25
Building and civil engineering sealants - Determination of resistance to compression (ISO 11432:2021)
UNE-EN 771-2:2011+A1:2016 UNE
Status: Vigente/ 2022-03-15
Specification for masonry units - Part 2: Calcium silicate masonry units
UNE-EN 846-9:2019 UNE
Status: Vigente/ 2021-09-03
Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
UNE-EN 1052-2:2018 UNE
Methods of test for masonry - Part 2: Determination of flexural strength. (Consolidated versión)
UNE-EN 14016-2:2006 UNE
Status: Vigente/ 2021-06-11
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods
UNE-EN 13892-3:2016 UNE
Methods of test for screed materials - Part 3: Determination of wear resistance - Böhme
UNE-EN 1745:2020 UNE
Status: Vigente/ 2020-11-04
Masonry and masonry products - Methods for determining thermal properties
UNE-EN 14783:2015 UNE
Status: Vigente/ 2020-06-09
Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
UNE-EN 772-10:1999 UNE
Status: Vigente/ 2020-05-22
METHODS OF TEST FOR MASONRY UNITS. PART 10: DETERMINATION OF MOISTURE CONTENT OF CALCIUM SILICATE AND AUTOCLAVED AERATED CONCRETE UNITS.
UNE-EN 1052-1:1999 UNE
SETHODS OF TEST FOR MASONRY - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH
UNE-EN 1052-3:2003 UNE
Methods of test for masonry - Part 3: Determination of initial shear strength.
UNE-EN 845-1:2014+A1:2018 UNE
Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
UNE-EN 507:2020 UNE
Status: Vigente/ 2020-02-19
Roofing and cladding products from metal sheet - Specification for fully supported products of aluminium sheet
UNE-EN 13892-9:2020 UNE
Methods of test for screed materials - Part 9: Dimensional stability
UNE-EN 13892-1:2003 UNE
Status: Current/2019-01-01
Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test
UNE-EN 13892-4:2003 UNE
Methods of test for screed materials - Part 4: Determination of wear resistance-BCA
UNE-EN 13892-6:2003 UNE
Methods of test for screed materials - Part 6: Determination of surface hardness
UNE-EN 13892-8:2003 UNE
Methods of test for screed materials - Part 8: Determination of bond strength
UNE-EN 13892-7:2006 UNE
Methods of test for screed materials - Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings
UNE-EN 13892-5:2006 UNE
Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer
UNE-EN 14016-1:2006 UNE
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements
UNE-EN 845-3:2014+A1:2018 UNE
Status: Vigente/ 2018-11-28
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
UNE-EN 845-2:2014+A1:2018 UNE
Specification for ancillary components for masonry - Part 2: Lintels
UNE-EN 772-21:2011 UNE
Status: Vigente/ 2017-11-21
Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption
UNE-EN 772-1:2011+A1:2016 UNE
Methods of test for masonry units - Part 1: Determination of compressive strength
UNE-EN 14509:2014 UNE
Status: Vigente/ 2016-10-05
Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
