Clear filters Apply
Results for:
Number of results 155
UNE-EN ISO 16092-3:2018 UNE
Status: Vigente/ 2022-02-09
Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)
UNE-EN ISO 16092-4:2021 UNE
Status: Vigente/ 2021-06-23
Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019)
UNE-EN ISO 16092-2:2021 UNE
Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019)
UNE 15328:1992 UNE
Status: Current/2021-01-04
ACCEPTANCE CONDITIONS OF OPEN FRONT MECHANICAL POWER PRESSES. TESTING OF THE ACCURACY.
UNE-EN 12622:2011+A1:2013 UNE
Status: Vigente/ 2020-06-05
Safety of machine tools - Hydraulic press brakes
UNE-EN 13985:2003+A1:2009 UNE
Status: Vigente/ 2020-01-01
Machine tools - Safety - Guillotine shears
UNE-EN ISO 16092-1:2018 UNE
Status: Vigente/ 2018-11-21
Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017)
UNE-EN 16252:2013 UNE
Status: Vigente/ 2018-09-14
Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
UNE-EN 16500:2015 UNE
Status: Vigente/ 2015-03-04
Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
UNE-EN 14673:2006+A1:2010 UNE
Status: Vigente/ 2010-05-01
Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (Endorsed by AENOR in May of 2010.)
UNE 15506:1997 UNE
Status: Vigente/ 1997-03-20
OPEN FRONT MECHANICAL POWER PRESSES. VOCABULARY.
UNE 15504:1994 UNE
Status: Current/2023-01-12
STRAIGHT-SIDED SINGLE-ACTION MECHANICAL POWER PRESSES FROM 400 KN UP TO AND INCLUDING 4000 KN NOMINAL FORCE. CHARACTERISTICS AND DIMENSIONS.
UNE 15505:1994 UNE
STRAIGHT-SIDED HIGH-SPEED MECHANICAL POWER PRESSES FROM 250 KN UP TO AND INCLUDING 400 KN NOMINAL FORCE. CHARACTERISTICS AND DIMENSIONS.
UNE 15501:1992 UNE
OPEN FRONT MECHANICAL POWER PRESSES. CAPACITY RATINGS AND DIMENSIONS.
UNE-EN 14656:2006+A1:2010 UNE
Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (Endorsed by AENOR in May of 2010.)
UNE 16730:1986 UNE
Status: Vigente/ 1986-10-15
ROUND PUNCHES WITH 60 GRADES CONICAL HEAD AND STRAIGHT SHANK.
UNE 16710:1986 UNE
Status: Vigente/ 1986-06-15
MACHINED PLATES FOR PRESS TOOLS, MOULDS, JIGS AND FIXTURES - NOMINAL DIMENSIONS.
ISO 9182-3:2023 ISO
Status: Published/ 2023-08-15
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
ISO 9182-2:2023 ISO
Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
ISO 9182-4:2023 ISO
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
ISO 9182-5:2023 ISO
Status: Published/ 2023-08-14
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
ISO 9182-1:2023 ISO
Status: Published/ 2023-08-04
Tools for pressing — Guide pillars — Part 1: Types
ISO 11901-3:2021 ISO
Status: Published/ 2021-08-17
Tools for pressing — Gas springs — Part 3: Gas spring with increased spring force and compact built height
ISO 11901-4:2021 ISO
Status: Published/ 2021-08-16
Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same built height
ISO 11901-5:2021 ISO
Status: Published/ 2021-03-04
Tools for pressing — Gas springs — Part 5: Safety instructions for gas springs
ISO 23481:2021 ISO
Status: Published/ 2021-02-17
Tools for pressing — Cam driver plates
ISO 21223:2019 ISO
Status: Published/ 2019-12-10
Tools for pressing — Vocabulary
ISO 10243:2019 ISO
Status: Published/ 2019-05-17
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding
ISO 20929:2018 ISO
Status: Published/ 2018-10-23
Tools for pressing — Heel guidings in large stamping and forming dies
ISO 11901-2:2018 ISO
Tools for pressing — Gas springs — Part 2: Specification of accessories
ISO 20928:2018 ISO
Status: Published/ 2018-10-02
Tools for pressing — Spring plungers with helicoidal compression steel spring or gas spring
ISO 9448-8:2013 ISO
Status: Published/ 2013-12-11
Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1
ISO 9448-9:2013 ISO
Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2
ISO 9448-10:2013 ISO
Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2
ISO 9448-11:2013 ISO
Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2
ISO 9448-7:2013 ISO
Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1
ISO 9448-1:2013 ISO
Tools for pressing — Guide bushes — Part 1: Forms
ISO 9448-2:2013 ISO
Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1
ISO 9448-3:2013 ISO
Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1
ISO 9448-4:2013 ISO
Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1
ISO 9448-5:2013 ISO
Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1
ISO 9448-6:2013 ISO
Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1
ISO 23480:2013 ISO
Status: Published/ 2013-03-01
Tools for pressing — Sliding plates
ISO 9183-2:2011 ISO
Status: Published/ 2011-09-13
Tools for pressing — Wear plates for press dies — Part 2: Type B
ISO 10242-1:2011 ISO
Tools for pressing — Punch holder shanks — Part 1: Type A
ISO 18084:2011 ISO
Press tools for tablets — Punches and dies
ISO 8695:2010 ISO
Status: Published/ 2010-06-25
Tools for pressing — Punches — Nomenclature and terminology
ISO 10071-1:2008 ISO
Status: Published/ 2008-11-12
Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty
ISO 11900-2:2008 ISO
Status: Published/ 2008-10-30
Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty
ISO 11903:2008 ISO
Tools for pressing — Guide pillar mountings
