Clear filters Apply
Results for:
Number of results 160
UNE 18185:1989 UNE
Status: Vigente/ 2022-07-21
STRAIGHT BEVEL GEARS FOR GENERAL ENGINEERING AND HEAVY ENGINEERING. MODULES AND DIAMETRAL PICHES.
UNE-EN ISO 13691:2002 UNE
Status: Vigente/ 2002-12-01
Petroleum and natural gas industries. High-speed special-purpose gear units (ISO 13691:2001) (Endorsed by AENOR in December of 2002.)
UNE-EN ISO 2203:1998 UNE
Status: Vigente/ 1998-07-29
TECHNICAL DRAWINGS. CONVENTIONAL REPRESENTATION OF GEARS. (ISO 2203:1973).
UNE 18004-1:1993 UNE
Status: Vigente/ 1993-06-14
GEARS. VOCABULARY AND GEOMETRICAL DEFINITIONS. PART 1: GENERAL DEFINITIONS, CYLINDRICAL, BEVEL AND HYPOID GEARS AND GEAR PAIRS.
UNE 18005:1984 UNE
Status: Vigente/ 1984-04-15
CYLINDRICAL GEARS FOR GENERAL ENGINEERING AND FOR HEAVY ENGINEERING. MODULES AND DIAMETRICAL PITCHES.
UNE 18004-4:1979 UNE
Status: Vigente/ 1979-12-15
GEARS. VOCABULARY AND GEOMETRIC DEFINITIONS. SEREW GEARS.
UNE 18112:1978 UNE
Status: Vigente/ 1978-01-15
STRAIGHT BEVEL GEARS. INFORMATION TO BE GIVEN IN THE CHARTS.
UNE 18040:1965 UNE
Status: Vigente/ 1965-11-15
GEARS. DENTINE WEAR AND BREAK NOMENCLATURE.
UNE 18184:1990 UNE
Status: Vigente/ 2021-03-18
STRAIGHT BEVEL GEARS FOR GENERAL ENGINEERING AND HEAVY ENGINEERING. BASIC RACK.
UNE 18016:1984 UNE
Status: Vigente/ 1984-11-15
CYDINDRICAL GEARS FOR GENERAL AND HEAVY ENGINEERING-BASIC RACK.
UNE 18033:1984 UNE
INTERNATIONAL GEAR NOTATION. SYMBOLS FOR GEOMETRICAL DATA.
UNE 18048:1983 ERRATUM UNE
Status: Vigente/ 1983-07-15
PARALLEL INVOLUTE GEARS - ISO SYSTEM OF ACCUEACY.
UNE 18048:1983 UNE
Status: Vigente/ 1983-02-15
PARALLEL INVOLUTE GEARS - ISO SYSTEM OF ACCURACY.
UNE 18029:1978 UNE
Status: Vigente/ 1978-06-15
GEARS. TOOLS FOR CUTTING. SINGLE-START SOLID (MONO-BLOC) GEAR HOBS WITH AXIAL KEYWAY, 1 TO 20 DIAMETRAL PITCH.
UNE 18060:1978 UNE
GEARS. CUTTING TOOLS. HOBBING CUTTERS WITH ONE FILLET TIPS. QUALITY.
UNE 18068:1978 UNE
CYLINDRICAL GEARS. INFORMATION TO BE GIVEN FOR THE PLANES.
UNE 18103:1964 UNE
Status: Vigente/ 1964-03-15
STRAIGHT GEARS. CUTTING TOOLS. CUTTING KNIFE-SPIN PINION. DIMENSIONS.
UNE 18066:1961 UNE
Status: Vigente/ 1961-10-15
HELICAL STRAIGHT GEARS.
UNE 18051:1957 UNE
Status: Vigente/ 1957-07-15
STRAIGHT BEVEL GEARS.
ISO 10828:2024 ISO
Status: Published/ 2024-04-23
Worm gears — Worm profiles and gear mesh geometry
ISO 10300-2:2023 ISO
Status: Published/ 2023-08-24
Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (macropitting)
ISO 10300-3:2023 ISO
Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
ISO 10300-1:2023 ISO
Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors
ISO 14635-2:2023 ISO
Status: Published/ 2023-07-06
Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
ISO 14635-1:2023 ISO
Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
ISO 14635-3:2023 ISO
Status: Published/ 2023-07-05
Gears — FZG test procedures — Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
ISO/TR 6336-30:2022 ISO
Status: Published/ 2022-12-07
Calculation of load capacity of spur and helical gears — Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5
ISO/TR 10825-2:2022 ISO
Status: Published/ 2022-10-05
Gears — Wear and damage to gear teeth — Part 2: Supplementary information
ISO 10825-1:2022 ISO
Status: Published/ 2022-05-25
Gears — Wear and damage to gear teeth — Part 1: Nomenclature and characteristics
ISO/TS 6336-21:2022 ISO
Status: Published/ 2022-05-24
Calculation of load capacity of spur and helical gears — Part 21: Calculation of scuffing load capacity — Integral temperature method
ISO/TS 6336-20:2022 ISO
Calculation of load capacity of spur and helical gears — Part 20: Calculation of scuffing load capacity — Flash temperature method
ISO/TR 10300-32:2021 ISO
Status: Published/ 2021-04-07
Calculation of load capacity of bevel gears — Part 32: ISO rating system for bevel and hypoid gears — Sample calculation for scuffing load capacity
ISO/TS 10300-20:2021 ISO
Calculation of load capacity of bevel gears — Part 20: Calculation of scuffing load capacity — Flash temperature method
ISO 4468:2020 ISO
Status: Published/ 2020-07-28
Gear hobs — Accuracy requirements
ISO/TS 14521:2020 ISO
Status: Published/ 2020-04-14
Gears — Calculation of load capacity of worm gears
ISO 1328-2:2020 ISO
Status: Published/ 2020-02-26
Cylindrical gears — ISO system of flank tolerance classification — Part 2: Definitions and allowable values of double flank radial composite deviations
ISO 6336-1:2019 ISO
Status: Published/ 2019-11-27
Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors
ISO 6336-2:2019 ISO
Status: Published/ 2019-11-26
Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting)
ISO 6336-3:2019 ISO
Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
ISO 6336-6:2019 ISO
Calculation of load capacity of spur and helical gears — Part 6: Calculation of service life under variable load
ISO/TR 10064-1:2019 ISO
Status: Published/ 2019-09-11
Code of inspection practice — Part 1: Measurement of cylindrical gear tooth flanks
ISO/TS 6336-4:2019 ISO
Status: Published/ 2019-01-30
Calculation of load capacity of spur and helical gears — Part 4: Calculation of tooth flank fracture load capacity
ISO/TR 6336-31:2018 ISO
Status: Published/ 2018-09-26
Calculation of load capacity of spur and helical gears — Part 31: Calculation examples of micropitting load capacity
ISO/TS 6336-22:2018 ISO
Status: Published/ 2018-08-29
Calculation of load capacity of spur and helical gears — Part 22: Calculation of micropitting load capacity
ISO/TR 10300-30:2017 ISO
Status: Published/ 2017-12-12
Calculation of load capacity of bevel gears — Part 30: ISO rating system for bevel and hypoid gears — Sample calculations
ISO 14104:2017 ISO
Status: Published/ 2017-04-04
Gears — Surface temper etch inspection after grinding, chemical method
ISO 23509:2016 ISO
Status: Published/ 2016-11-16
Bevel and hypoid gear geometry
ISO 6336-5:2016 ISO
Status: Published/ 2016-08-04
Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials
ISO 1328-1:2013 ISO
Status: Published/ 2013-08-20
Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
ISO/TR 22849:2011 ISO
Status: Published/ 2011-04-07
Design recommendations for bevel gears
